开云体育

Yes, it did go to https and is working great hear in the states. 73 Michael

Tested quite some links, all work missing a picture ? https://www.g8jcf.uk/g8jcfsdr_drt1/instructions_for_use.htm and on more pages the same -- PE3ES / F4VTQ de Erwin

Hi I have upgraded the G8JCFSDR website - www.g8jcf.uk ( http://www.g8jcf.uk ) - to HTTPS, ie SSL, using Lets Encrypt. I would be most grateful if you could please test the HTTPS website and confirm

Hi All,, i am a newbee,, I can't wait for the arrival of Elektor SDR Shield 2.0 from Netherlands, for that I tried to change si5351vfo2_1_G8GCFSDR_jmP.ino to G8JCFSDR_test.ino (in attachment), so I

Hi All,, I can't wait for the arrival of Elektor SDR Shield 2.0 from Netherlands, for that I tried to change si5351vfo2_1_G8GCFSDR_jmP.ino to G8JCFSDR_test.ino (in attachment), so I can observe

Great News Dirk The Trace mode is only for inside details which you can inspect and/or send to me to help you/me diagnose problems, but it seems that all should be working now (hopefully !!!). The

Hi Peter, many thanks for the detailed description - almost what I tried before, except the additional setting in the General tab and doing all in trace mode. For some reason the Cannot-Open-COM5

Hi Dirk Before you start up G8JCFSDR, use Task Manager to make sure there is no instance already loaded, then start G8JCFSDR from the Start Menu in Trace Mode. Do NOT Click power ON. Go into Config,

Hi all, I'm facing some massive problems with the Elektor SDR Shield 2. Let me try to explain this in a chronological order: 1.) Installation of b828 went fine. 2.) During the first start (with

Hi Hans Hopefully your problems will be resolved very quickly. Take Care & Stay Safe Peter - GM8JCF

Hello, Thank you all for the informatie about my problem. I wil come later back with my answers. Sorry i have problems home. Regard Hans Verstuurd vanaf mijn iPhone

Thanks Peter, It's important to share experiences... and I am convinced that the antenna must be the focus of attention. And I'll try the "generator function" for the SDR Shild of your SDR Software

Hi, all, I also have been using a MiniWhip for more than 10 years now and I also bought mine from Roelof. The original manual (though most likely not the newest) can be found here :

Hi A good aerial/antenna system is a must for HF reception, but unfortunately most of us live in houses with small gardens so we are unable to set up the ideal antenna. This difficulty really impacts

Hi Hans The G8JCFSDR has a built-in signal generator when using the Elektor SDR Shield. Enter Config, and click Calibrate, the SDR Shield Calibrate screen will be displayed - for the purposes of

Hi Dominique Great to hear from you, welcome to the group, and wishing you all the very best with your Amateur Radio exam(s), bonne chance :-) As with all things RF, the antenna is the single most

Hello, I am a newbie from France on this forum. I bought an Elektor SDR Shield (the kit) three months ago and I am experimenting Short Waves listening. I live in a house in Britanny and my first

Hi Hans Here is my Broadcast Band Plan which contains lots of presets especially in the 41m band. Save this file wherever you have installed the G8JCFSDR to, usually C:\Program Files

Hi Massimo Thank you, I will try out your recoding tomorrow. Because they are C-QUAM, the recording should demodulate using one of the existing AM demodulators in the G8JCFSDR (although not of course

Hi Hans Adjusting the dHz digit will NOT do anything to the frequency - the dHz setting is a hang over from the days of real DDS chps like the AD9850, I must just hide that digit position !! The