开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Sotabeams speech compressor vs The One Big Punch by W4RT


 

开云体育

I wonder of anyone has “The One Big Punch” adaptation done to their mic by W4RT when he was modding the 817? ?If so it would be neat to see the difference between?
“The One Big Punch” and the Sotabeams processor. ?I think “The One Big Punch” is just a capacitor or a few other parts to knock off the wasted frequencies in the audio but for the price the Sotabeams processor is probably better for one reason or the other. ?I know the W4RT (BHI I think) audio processor that I had i stalled does make a difference in the receiver but that was the most expensive upgrade W4RT did back in the day. ?Any thoughts on the transmission audio between the two transmitter processors??

Dave K8WPE


On Apr 6, 2025, at 6:39?PM, bobvinet via groups.io <bobvinet@...> wrote:

?
Martin HB3YDM
?
You'll find the Sotabeam Speech Compressor at this link
?
?
I have on one my FT-818. Shipment is quick and efficient when they are in stock. They are popular and often sold out.
?
73
Robert VE9CDN


 

Hi David,
?
I have both the One Big Punch (20 years old now) and the SOTAbeams speech processor (labeled DYC-8x7).? The OBP is a real speech processor, not just passive components.? They both work.? I think the SOTAbeams gives a louder signal, from on-air testing with remote SDR's.? (There were some other mods floating around the internet to change components in the stock mic to implement a passive high-pass filter, but this is something separate.)
?
The OBP suffers from RF getting into the speech processor in the mic, causing a feedback squeal.? Care needs to be taken to isolate the mic as much as possible, but this is hard in the field when the antenna is often feet from the mic.
?
The SOTAbeams processor seems to be less susceptible to RF back into the unit.? But it has happened.? I tried using a flat cable to connect the mic to the processor to reduce bulk in the pack, and it was particularly susceptible to RF back into the unit.? The stock curly microphone cord has better isolation.? ??
?
Care needs to be taken with both units in reducing the SSB mic gain setting on the FT-817/818.? My setting is around 30.? I listened to myself on remote SDR's to find the right setting.??
?
When it is all set up, I get the effect of 1-2 s-units of gain from the SOTAbeams processor.? I concluded this by using 0.5 Watts with the processor on, compared to 5 Watts with the processor ff and mic gain returned to 100.? 0.5W with speech processor was still louder on a remote SDR than 5W without processing and mic gain set to 100.? Greater than 10 dB of effective talk power.?
?
73
Mike N9OHW