开云体育

Microphone specs

Pietro Molina All Messages By This Member #112412 Is there any OM who can tell me the specs of the microphone to use with the 817? I'd like to use my headphone set, but I can't have any modulation I put the headset output to the standard microphone connector (with an adapter...). Maybe I need to use the data connector? Pietro I2OIM
Pat Campbell All Messages By This Member #112413 I made an adapter that I use with a Heil headset and also a computer headset. If you look at the mic pin connections in the 817 manual pg 5. Pin 4 is the mic audio input and you need to install a 4.7k ohm resistor to pin 6 ( marked +5v) to provide power for the mic element. The same adapter works for both the Heil and the computer headset mic. If I remember correctly the numbers on the plug pin out in the manual is reversed fron a cat5 pin out.
Pietro Molina All Messages By This Member #112414 Thanks a lot. I'll try the trick. Pietro I2OIM (via Tablet) toggle quoted message Show quoted text Il gio 17 feb 2022, 21:40 Pat Campbell <Wa3uoe@...> ha scritto: I made an adapter that I use with a Heil headset and also a computer headset. If you look at the mic pin connections in the 817 manual pg 5. Pin 4 is the mic audio input and you need to install a 4.7k ohm resistor to pin 6 ( marked +5v) to provide power for the mic element. The same adapter works for both the Heil and the computer headset mic. If I remember correctly the numbers on the plug pin out in the manual is reversed fron a cat5 pin out.
Pietro Molina All Messages By This Member #112416 TNX a lot. It works. 73 Pietro (via Tablet) toggle quoted message Show quoted text Il gio 17 feb 2022, 21:40 Pat Campbell <Wa3uoe@...> ha scritto: I made an adapter that I use with a Heil headset and also a computer headset. If you look at the mic pin connections in the 817 manual pg 5. Pin 4 is the mic audio input and you need to install a 4.7k ohm resistor to pin 6 ( marked +5v) to provide power for the mic element. The same adapter works for both the Heil and the computer headset mic. If I remember correctly the numbers on the plug pin out in the manual is reversed fron a cat5 pin out.
Pat Campbell All Messages By This Member #112417 Glad to hear it worked.
Joe K8JP/V31JP All Messages By This Member #112418 开云体育 I am corn-fuzed or out dated. My previous Heil headset microphones were all with dynamic elements. Are they now with electrite (sp) elements? I remember discussions about making them available or to modify to them. I remember my FT-100 & FT-857D when mobile, I sometimes used my Heil set for 2 meters & HF EMCOMMs. It wired directly up to the connector. Getting old. 73, Joe, K8JP/K5 On 2/20/2022 1:32 PM, Pat Campbell wrote: Glad to hear it worked. -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek
Pietro Molina All Messages By This Member #112419 Actually, I don't know. The headset I'm using is a mono one for a single ear, semiprofessional for?contact center. I didn't try with headsets for smartphone or similar.? Pietro (via Tablet) toggle quoted message Show quoted text Il dom 20 feb 2022, 20:53 Joe K8JP/V31JP <v31jp1957@...> ha scritto: I am corn-fuzed or out dated. My previous Heil headset microphones were all with dynamic elements. Are they now with electrite (sp) elements? I remember discussions about making them available or to modify to them. I remember my FT-100 & FT-857D when mobile, I sometimes used my Heil set for 2 meters & HF EMCOMMs. It wired directly up to the connector. Getting old. 73, Joe, K8JP/K5 On 2/20/2022 1:32 PM, Pat Campbell wrote: Glad to hear it worked. -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek
Joe K8JP/V31JP All Messages By This Member #112420 开云体育 Maybe I saw wrong, but I thought someone referred to a Heil Headset, Pietro. Typical headsets for office use use electorate condenser microphones and need adaption to use with the FT-817 and other Yaesu radios. Heil is a brand of headsets, not a nomenclature for headset design with a boom microphone. 73, Joe, K8JP/K5 On 2/21/2022 12:19 AM, Pietro Molina wrote: Actually, I don't know. The headset I'm using is a mono one for a single ear, semiprofessional for?contact center. I didn't try with headsets for smartphone or similar.? Pietro (via Tablet) -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek
Pietro Molina All Messages By This Member #112422 Joe, I don't understand. The first to mention Heil was you, wasn't? If the microphone?is a condenser type, the resistor that Pat suggested to me was the solution . Solved! 73 Pietro I2OIM toggle quoted message Show quoted text Il giorno lun 21 feb 2022 alle ore 12:12 Joe K8JP/V31JP <v31jp1957@...> ha scritto: Maybe I saw wrong, but I thought someone referred to a Heil Headset, Pietro. Typical headsets for office use use electorate condenser microphones and need adaption to use with the FT-817 and other Yaesu radios. Heil is a brand of headsets, not a nomenclature for headset design with a boom microphone. 73, Joe, K8JP/K5 On 2/21/2022 12:19 AM, Pietro Molina wrote: Actually, I don't know. The headset I'm using is a mono one for a single ear, semiprofessional for?contact center. I didn't try with headsets for smartphone or similar.? Pietro (via Tablet) -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek
Pat Campbell All Messages By This Member #112423 I was the one yo first mention Heil but i originally made the adapter for a computer headset. It just happened that I got a Heil headset at a hamfest and it works fine with the same adapter. It may not need the resistor for power but it works fine. toggle quoted message Show quoted text On Mon, Feb 21, 2022, 1:20 PM Pietro Molina <pietro@...> wrote: Joe, I don't understand. The first to mention Heil was you, wasn't? If the microphone?is a condenser type, the resistor that Pat suggested to me was the solution . Solved! 73 Pietro I2OIM Il giorno lun 21 feb 2022 alle ore 12:12 Joe K8JP/V31JP <v31jp1957@...> ha scritto: Maybe I saw wrong, but I thought someone referred to a Heil Headset, Pietro. Typical headsets for office use use electorate condenser microphones and need adaption to use with the FT-817 and other Yaesu radios. Heil is a brand of headsets, not a nomenclature for headset design with a boom microphone. 73, Joe, K8JP/K5 On 2/21/2022 12:19 AM, Pietro Molina wrote: Actually, I don't know. The headset I'm using is a mono one for a single ear, semiprofessional for?contact center. I didn't try with headsets for smartphone or similar.? Pietro (via Tablet) -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek
Pietro Molina All Messages By This Member #112424 Okay!?However, thanks to both, I solved it! I2OIM toggle quoted message Show quoted text Il giorno lun 21 feb 2022 alle ore 19:31 Pat Campbell <Wa3uoe@...> ha scritto: I was the one yo first mention Heil but i originally made the adapter for a computer headset. It just happened that I got a Heil headset at a hamfest and it works fine with the same adapter. It may not need the resistor for power but it works fine. On Mon, Feb 21, 2022, 1:20 PM Pietro Molina <pietro@...> wrote: Joe, I don't understand. The first to mention Heil was you, wasn't? If the microphone?is a condenser type, the resistor that Pat suggested to me was the solution . Solved! 73 Pietro I2OIM Il giorno lun 21 feb 2022 alle ore 12:12 Joe K8JP/V31JP <v31jp1957@...> ha scritto: Maybe I saw wrong, but I thought someone referred to a Heil Headset, Pietro. Typical headsets for office use use electorate condenser microphones and need adaption to use with the FT-817 and other Yaesu radios. Heil is a brand of headsets, not a nomenclature for headset design with a boom microphone. 73, Joe, K8JP/K5 On 2/21/2022 12:19 AM, Pietro Molina wrote: Actually, I don't know. The headset I'm using is a mono one for a single ear, semiprofessional for?contact center. I didn't try with headsets for smartphone or similar.? Pietro (via Tablet) -- Regards, Joe, K8JP/V31JP, Ronnie, Martin & Sidney Pontek 175 Diamond Loch Rd., Apt. 5 Gilmer, TX 75644-9374 U.S.A. 903-204-2318 (My TX cellular) Member FOC-1743 Feb 2001, QCWA-LM21894, OOTC-4607, A1OP, CFO 1055, SKCC-3171T, NAQCC-5798, Flying Pig-2819, FISTS-7625CC951, A1C-2299, SOC 1075, 10-10 22977, PG1915841, CW Rag chewers #21, Facebook: Joe Pontek

Previous Topic Next Topic