开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Felderownersgroup
  2. Topics

Tooling sleeves

 

I'm wondering if anyone here has a source for 65mm od tooling sleeves? Omas has up to 60mm but I don't see anything at 65mm. I'd prefer to just buy one rather than machine one.?


Screenshot_20250205_175353_Samsung Notes.jpg

 

Jared, my Zuani sleeves are 65 mm OD.
They are not threaded though like your picture.
They are a through bolt. My old Garniga sleeves are 60mm and threaded with double nuts.
 

Thanks Joe. Omas has through bolted sleeves but only 60mm od / 50mm id. I'll look around some more.?



On Wed, Feb 12, 2025, 11:25 AM Joe Calhoon via <joecalhoon=[email protected]> wrote:
Jared, my Zuani sleeves are 65 mm OD.
They are not threaded though like your picture.
They are a through bolt. My old Garniga sleeves are 60mm and threaded with double nuts.





Screenshot_20250212_120838_Samsung Notes.jpg

 

The Zuani ones might work. They are 3 bolt for tenon heads and 4 bolt for profile heads.
 

开云体育

?I have never felt with Oella tool but they have some interesting pricing
Also Leitz tool Grand Rapids?
Side not they do a very great job of saw and planner blade sharpening.
You also have Rengate who provides very nice euro tools!
Than Swiss co Ortlie
Mac,,


martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330?cell

Designing and building for 50 years


On Feb 12, 2025, at 10:25?AM, Joe Calhoon via groups.io <joecalhoon@...> wrote:

?Jared, my Zuani sleeves are 65 mm OD.
They are not threaded though like your picture.
They are a through bolt. My old Garniga sleeves are 60mm and threaded with double nuts.





 

Jared, what type head are you trying to mount?
Sleeves are usually specific to the manufacturer.

 

Joe, it's an Omas cope head/stack.?


On Wed, Feb 12, 2025, 12:58 PM Joe Calhoon via <joecalhoon=[email protected]> wrote:
Jared, what type head are you trying to mount?
Sleeves are usually specific to the manufacturer.





20250212_130819.jpg
20250212_130843.jpg

 

No Holes in the head. Will have to be a threaded sleeve.

 

Or have a simple top hat sleeve made that is just below the top cutter so the spindle nut will hold everything tight. Probably have spacers between the cutters?

 

Joe, thanks for the info on the through bolt sleeve. I hadn't seen those ans was wondering what they centered on with the bolts in the way. I never considered the heads were bored for the bolts. I think for a top hat bushing it would need to 2 peice and ideally one long enough to go through all three plates with a short one on the bottom just to keep everything together. If I'm going to machine it (and it looks like I'm going to have to) I might as just machine a threaded sleeve and top nut and let it sit as an assembly.??

Mac, I've done business with Oella before but I don't see anything on his website with the dimensions I'm looking for.?

On Wed, Feb 12, 2025, 2:39 PM Joe Calhoon via <joecalhoon=[email protected]> wrote:
Or have a simple top hat sleeve made that is just below the top cutter so the spindle nut will hold everything tight. Probably have spacers between the cutters?





 

Jared, that should work. I was thinking of a single top hat bushing because that’s how I run a Garniga square edge sticking cutter set I used on the Crafter. Because the groover is adjustable from cabinet doors to house doors I have it on a bushing with a hollowed out top cap that tightens the whole assembly on the shaft regardless of how many spacers I’m using on the groover.

Seems like Omas should have a sleeve for that cutter set. Did you talk to the US dealer?

IMG_3218.jpeg
IMG_7893.jpeg

1 - 11 of 11