开云体育

Screw in hinges

Airtight: Clamps by Air Compression All Messages By This Member #131319 Hi , any one have a contact for purchasing Anuba hinges? in particular 452.05sm probably not current no.? I need 6 nickel , I have bronze in stock. preference is distributor? thanks in advance mac,,
jontathan samways All Messages By This Member #131320 Mac, if you get really stuck try searching the Spanish market. Over here you need to use a cover plate for specific colours, the covers are metal and quality, not the modern plastic rubbish. Kindest regards Jonathan Samways toggle quoted message Show quoted text On Fri, 7 Jul 2023, 7:27 pm Airtight: Clamps by Air Compression, <airtightclamps@...> wrote: Hi , any one have a contact for purchasing Anuba hinges? in particular 452.05sm probably not current no.? I need 6 nickel , I have bronze in stock. preference is distributor? thanks in advance mac,,
Joe Calhoon All Messages By This Member #131322 Mac, I have not dug into this for quite a while but I don’t think any distributors in the US for Anuba. FFI and GU sell knockoffs of Anuba but if you need original most likely will have to come from Europe.
mac campshure All Messages By This Member #131328 开云体育 ?ALL : Thanks for your help? Functional Fenestration has AGB But not the adjustable type for vertical alignment I am looking for . Hafele US also has same type minimum order of 100. The doors I have the gasket is one frame one door, not that it makes a difference. mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330?cell airtightclamps@... Designing and building for 50 years toggle quoted message Show quoted text On Jul 7, 2023, at 11:54 PM, Joe Calhoon via groups.io <joecalhoon@...> wrote: ?Mac, I have not dug into this for quite a while but I don’t think any distributors in the US for Anuba. FFI and GU sell knockoffs of Anuba but if you need original most likely will have to come from Europe.
Joe Calhoon All Messages By This Member #131331 Mac, FFI sells the Zenit hinge in 16 and 20mm. Adjustable in all directions and will take a heavy load. These require a fairly thick lip if your gasket is in the lip. Probably 18 to 22mm thick. I have jigs I can loan if you go with these. See pictures. GU makes a 3 part hinge that works with doors built with window system tooling with thin lips land gasket. I’ll PM you the info on these. This one is very similar to Anuba brand. They are handed and minimum order of 10. Joe 517EFE38-540D-45E2-ADE9-87D6784499B2.jpeg 0618A75A-A5E9-44DB-A731-F6DA4DA30D37.jpeg
mac campshure All Messages By This Member #131333 开云体育 Hi Joe? Class act on the entrance!!when I was a door and window builder that’s the stuff I used to do . If it was anything but straight and square that what I did. had my fill of that!!! martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330?cell airtightclamps@... Designing and building for 50 years toggle quoted message Show quoted text On Jul 8, 2023, at 1:20 PM, Joe Calhoon via groups.io <joecalhoon@...> wrote: ?Mac, FFI sells the Zenit hinge in 16 and 20mm. Adjustable in all directions and will take a heavy load. These require a fairly thick lip if your gasket is in the lip. Probably 18 to 22mm thick. I have jigs I can loan if you go with these. See pictures. GU makes a 3 part hinge that works with doors built with window system tooling with thin lips land gasket. I’ll PM you the info on these. This one is very similar to Anuba brand. They are handed and minimum order of 10. Joe <517EFE38-540D-45E2-ADE9-87D6784499B2.jpeg> <0618A75A-A5E9-44DB-A731-F6DA4DA30D37.jpeg>
habacomike (Mike King) All Messages By This Member #131337 开云体育 Joe, I’m sure you have a door like that left over from demonstrating at your door workshop. ?I’m fine to drop by and take it off of your hands so you don’t have to just throw it away… Stunning work! Mike toggle quoted message Show quoted text On Jul 8, 2023, at 4:41 PM, mac campshure via groups.io <mac512002@...> wrote: Hi Joe? Class act on the entrance!!when I was a door and window builder that’s the stuff I used to do . If it was anything but straight and square that what I did. had my fill of that!!! martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330?cell airtightclamps@... Designing and building for 50 years On Jul 8, 2023, at 1:20 PM, Joe Calhoon via groups.io <joecalhoon@...> wrote: ?Mac, FFI sells the Zenit hinge in 16 and 20mm. Adjustable in all directions and will take a heavy load. These require a fairly thick lip if your gasket is in the lip. Probably 18 to 22mm thick. I have jigs I can loan if you go with these. See pictures. GU makes a 3 part hinge that works with doors built with window system tooling with thin lips land gasket. I’ll PM you the info on these. This one is very similar to Anuba brand. They are handed and minimum order of 10. Joe <517EFE38-540D-45E2-ADE9-87D6784499B2.jpeg> <0618A75A-A5E9-44DB-A731-F6DA4DA30D37.jpeg>
Joe Calhoon All Messages By This Member #131358 Mike, I might take you up on that! This one has been setting in the shop for over 9 months now. Contractor has been too busy to install it and customer in no hurry. Worried something might happen to it.

Previous Topic Next Topic