|
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Averman, Ed (FAA) via groups.io
Sent: Tuesday, July 28, 2020 9:37 PM
To: [email protected]
Subject: [FOG] FW: PF Bracket on AD 941
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.? ?I sent them from my i phone.? ?Even when pics are rotated
wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to this computer and to another.? The same picture rotated 90
degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
|
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures. Dave
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.? ?I sent them from my i phone.? ?Even when pics are rotated
wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to this computer and to another.? The same picture rotated 90
degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
-- Dave & Marie Davies
318-219-7868
|
Dave –
?
It came pre-drilled because I ordered it that way.? The Felder Catalog/Book shows a “Power feeder mount” for an
AD/A 951, Format-4/dual 51 (Part No. 430-112) under Power feeders accessories (page 465 in my book).? From the picture, it is a different mounting bracket than mine, and I do not know what my part number is.? Mine appears to be shaped similar to the
Hammer tilt away device (Part No 501-127) (same page in the book), but that clearly is not it.?
?
I ordered mine through Jesse at Felder Delaware, and he knew what to spec for the machine.? It is definitely heavy/sturdy!?
?
Skip
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 9:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures.
?
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.?
?I sent them from my i phone.? ?Even when pics are rotated wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to
this computer and to another.? The same picture rotated 90 degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do
the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
--
Dave & Marie Davies
318-219-7868
|
Thanks, Skip.? I'll give Jesse a call. Dave
On Tue, Jul 28, 2020 at 9:28 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
Dave –
?
It came pre-drilled because I ordered it that way.? The Felder Catalog/Book shows a “Power feeder mount” for an
AD/A 951, Format-4/dual 51 (Part No. 430-112) under Power feeders accessories (page 465 in my book).? From the picture, it is a different mounting bracket than mine, and I do not know what my part number is.? Mine appears to be shaped similar to the
Hammer tilt away device (Part No 501-127) (same page in the book), but that clearly is not it.?
?
I ordered mine through Jesse at Felder Delaware, and he knew what to spec for the machine.? It is definitely heavy/sturdy!?
?
Skip
?
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 9:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures.
?
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.?
?I sent them from my i phone.? ?Even when pics are rotated wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to
this computer and to another.? The same picture rotated 90 degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do
the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
--
Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Skip, good to get confirmation-was concerned my memory was starting to fail me... that sucker looks like it sticks out quite a bit - don’t bother measuring but whats your guess, 12”- 18”?
toggle quoted message
Show quoted text
On Jul 28, 2020, at 10:31 PM, David Davies <myfinishingtouch@...> wrote:
? Thanks, Skip.? I'll give Jesse a call. Dave On Tue, Jul 28, 2020 at 9:28 PM Averman, Ed (FAA) via <Ed.Averman= [email protected]> wrote:
Dave –
?
It came pre-drilled because I ordered it that way.? The Felder Catalog/Book shows a “Power feeder mount” for an
AD/A 951, Format-4/dual 51 (Part No. 430-112) under Power feeders accessories (page 465 in my book).? From the picture, it is a different mounting bracket than mine, and I do not know what my part number is.? Mine appears to be shaped similar to the
Hammer tilt away device (Part No 501-127) (same page in the book), but that clearly is not it.?
?
I ordered mine through Jesse at Felder Delaware, and he knew what to spec for the machine.? It is definitely heavy/sturdy!?
?
Skip
?
From: [email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 9:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures.
?
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.?
?I sent them from my i phone.? ?Even when pics are rotated wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to
this computer and to another.? The same picture rotated 90 degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do
the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
--
Dave & Marie Davies
318-219-7868
-- Dave & Marie Davies
318-219-7868
|
Mark – I’ll have to check tomorrow, but just guessing, I think it’s less than 12” or thereabouts.?? But, yes, it does stick out a bit, which is why I removed it for space considerations.?
?
B/T/W – Two people can mount the thing easier than one!?
?
Skip
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Mark Kessler
Sent: Tuesday, July 28, 2020 10:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Skip, good to get confirmation-was concerned my memory was starting to fail me... that sucker looks like it sticks out quite a bit - don’t bother measuring but whats your guess, 12”- 18”?
?
Thanks, Skip.? I'll give Jesse a call.
?
On Tue, Jul 28, 2020 at 9:28 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
Dave –
?
It came pre-drilled because I ordered it that way.? The Felder Catalog/Book shows a “Power feeder mount” for an
AD/A 951, Format-4/dual 51 (Part No. 430-112) under Power feeders accessories (page 465 in my book).? From the picture, it is a different mounting bracket than mine, and I do not know what my part number is.? Mine appears to be shaped similar to the
Hammer tilt away device (Part No 501-127) (same page in the book), but that clearly is not it.?
?
I ordered mine through Jesse at Felder Delaware, and he knew what to spec for the machine.? It is definitely heavy/sturdy!?
?
Skip
?
From:
[email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 9:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures.
?
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via
<Ed.Averman=[email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.?
?I sent them from my i phone.? ?Even when pics are rotated wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to
this computer and to another.? The same picture rotated 90 degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do
the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
--
Dave & Marie Davies
318-219-7868
--
Dave & Marie Davies
318-219-7868
|
Mark – ’Well, I didn’t use a micrometer of course (a very wise sage once told me that you use a micrometer for metal working, and a yardstick for woodworking), but a quick look
with a tape measure indicated that the horizontal projection of the PF bracket from the machine is just under 12 ?” (more like 12 3/16”).??
?
Hope that helps.?
?
B/T/W – The sage I mentioned above was not Brian, though Brian’s advice and wisdom have always been spot-on!?
?
Skip
?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]>
On Behalf Of Mark Kessler
Sent: Tuesday, July 28, 2020 10:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Skip, good to get confirmation-was concerned my memory was starting to fail me... that sucker looks like it sticks out quite a bit - don’t bother measuring but whats your guess, 12”- 18”?
?
Thanks, Skip.? I'll give Jesse a call.
?
On Tue, Jul 28, 2020 at 9:28 PM Averman, Ed (FAA) via <Ed.Averman=[email protected]> wrote:
Dave –
?
It came pre-drilled because I ordered it that way.? The Felder Catalog/Book shows a “Power feeder mount” for an
AD/A 951, Format-4/dual 51 (Part No. 430-112) under Power feeders accessories (page 465 in my book).? From the picture, it is a different mounting bracket than mine, and I do not know what my part number is.? Mine appears to be shaped similar to the
Hammer tilt away device (Part No 501-127) (same page in the book), but that clearly is not it.?
?
I ordered mine through Jesse at Felder Delaware, and he knew what to spec for the machine.? It is definitely heavy/sturdy!?
?
Skip
?
From:
[email protected] <[email protected]>
On Behalf Of David Davies
Sent: Tuesday, July 28, 2020 9:43 PM
To: [email protected]
Subject: Re: [FOG] PF Bracket on AD 941
?
Did you have to drill the mounting holes in your AD941 or did it come with them predrilled?? Thanks for the pictures.
?
On Tue, Jul 28, 2020 at 8:41 PM Averman, Ed (FAA) via
<Ed.Averman=[email protected]> wrote:
Well – I just received what I sent, and all pics are oriented
correctly.? Kind of makes my explanation below nonsensical since you won’t see the mis-orientation that was on my screen before I sent the email.?
?
Oh well!?
?
Skip
?
?
Dave et. al.? --?
?
Here’s pics of my
Felder Power Feeder bracket and how it mounts on my AD 941.? You can see that you have to remove both Left and Right access panels.? Only the Right panel is removed for bolt access in the photos.?
?
Apologies for the mis-orientation of the pics – sometimes they show up that way, and sometimes they appear correctly.?
?I sent them from my i phone.? ?Even when pics are rotated wrongly on my screen, they appear right-side up (sometimes) on a recipient’s screen.? ?So, I can’t say what you might see.?? What’s even weirder, yesterday I tried twice to send a picture to
this computer and to another.? The same picture rotated 90 degrees on this one and appeared correctly on the other.? A companion picture showed up correctly oriented on this one.? Maybe it is operator error, but the results seem to be random even when I do
the process exactly the same way.?
?
Anyway, ‘hope this helps!?? B/T/W – The mounting system for those access panels is really squirrely IMHO!?
?
Skip
?
?
--
Dave & Marie Davies
318-219-7868
--
Dave & Marie Davies
318-219-7868
|
Thanks for the info Skip!
|
