开云体育

I started this a while back.?? I took down a? norway maple tree? on the property.? This is? made from that tree.

There's a forced hot water toe kick heater on it's on zone? with a wireless thermostat and I'm going to make the molding to go around the base.?? Originall y there was not going to be a molding on the base but the house is over? 250 years old? and the floors are anything but? flat and level and it was either lift it? little and put molding under or start marking and sawing on the baseboard. I chose the former.

Here is the base unit? The upper unit is still in design phase

Nice Cliff, you must be well pleased with the results so far!
Eric

On Mon, Dec 5, 2016 at 9:55 AM, Cliff rohrabacher@...
[felder-woodworking] <felder-woodworking@...> wrote:

I started this a while back. I took down a norway maple tree on the
property. This is made from that tree.

There's a forced hot water toe kick heater on it's on zone with a
wireless thermostat and I'm going to make the molding to go around the
base. Originall y there was not going to be a molding on the base but the
house is over 250 years old and the floors are anything but flat and
level and it was either lift it little and put molding under or start
marking and sawing on the baseboard. I chose the former.

Here is the base unit The upper unit is still in design phase

--
Eric J. Smith
Trading as W.G. Joinery
ABN# 24 079 587 520
03 5784 9258
0411 264 272

PO BOX 353
Broadford Victoria
3658 Australia


[Non-text portions of this message have been removed]