开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Felderownersgroup
  2. Topics

Barth Multipress RP3001 with clamps and casework supports [Seattle area]

 

Includes:
BN-35 Barth Multipress RP3001 3000mm c/w 3 Manual / Hydraulic Clamps and 90? Stop
BM-35-10 Barth Hold Down Clamp
BM-35-20 Barth Lateral Press with 2 manual R&P
BM-35-42 Barth Casework support Top 3x
BM-35-41 Barth Casework support Bottom 3x
BM-35-55 Barth Mobility Kit
BM-35-57 Mitering Frame Bond Device
?
In excellent, almost unused condition.
?
Asking $14500 picked up in Seattle area.? I will likely regret it as it will be super expensive if I ever want to re-acquire it!? As much as I want to keep it, I'm finding that I'm not doing as much of large cabinet and case work that I thought I would.? May be someone can put it to much better use.
?
 

How much floor space does the rack consume?
?
-Michael Wolf
Tahoe City, CA
 

Hi Michael
?
The press is ~10' wide and 3.5' deep (4' when using the case support arms) and ~90" tall.? ?The mobility casters make it super easy to roll around.
?
Anil
 

You know you're going to kick yourself later if? you sell it.? Check with Joel Gelman.? He used the space on the back side of the multipress.? I can't remember?exactly now what he did but I remembered being impressed at the time?with?his ingenuity.
Dave Davies

On Fri, Apr 4, 2025 at 10:10?PM Anil via <anil00=[email protected]> wrote:
Hi Michael
?
The press is ~10' wide and 3.5' deep (4' when using the case support arms) and ~90" tall.? ?The mobility casters make it super easy to roll around.
?
Anil



--
Dave & Marie Davies

318-219-7868
 

开云体育

Just be aware that the multipress is not rigid enough to be moved on a regular basis. It loses calibration alarmingly quickly. I have the mobility kit but no longer move the press because of the calibration issues.

?

I love my press very much. But it has limitations.

?

Warm regards,

Lucky

?

Dr David Luckensmeyer

Designer & Maker

@luckensmeyer

M: 0413 013 115

?

From: [email protected] <[email protected]> on behalf of David Davies via groups.io <myfinishingtouch@...>
Date: Saturday, 5 April 2025 at 13:13
To: [email protected] <[email protected]>
Subject: Re: [FOG] Barth Multipress RP3001 with clamps and casework supports [Seattle area]

You know you're going to kick yourself later if? you sell it.? Check with Joel Gelman.? He used the space on the back side of the multipress.? I can't remember?exactly now what he did but I remembered being impressed at the time?with?his ingenuity.

Dave Davies

?

On Fri, Apr 4, 2025 at 10:10?PM Anil via <anil00=[email protected]> wrote:

Hi Michael

?

The press is ~10' wide and 3.5' deep (4' when using the case support arms) and ~90" tall.? ?The mobility casters make it super easy to roll around.

?

Anil


?

--

Dave & Marie Davies

318-219-7868
 

Ah okay, thanks Lucky, I had not realized that. ?Usually I only move it when I reconfigure my shop, though I’ve done it a few times this year :-)
?
Anil
 

You're probably right, David :-). Interestingly, a few years ago I was stupid enough to sell the 500V when I was moving homes and ended up buying the next version of it recently - much more expensive and not as heavy weight in construction.? So I'm in two minds about this listing..
?
 

Anil,
? I was thinking about buying?a 500V.? Curious how you think the build quality isn't as robust as it used to be?
Thanks
Dave Davies

On Sat, Apr 5, 2025 at 2:10?AM Anil via <anil00=[email protected]> wrote:
You're probably right, David :-). Interestingly, a few years ago I was stupid enough to sell the 500V when I was moving homes and ended up buying the next version of it recently - much more expensive and not as heavy weight in construction.? So I'm in two minds about this listing..
?



--
Dave & Marie Davies

318-219-7868
 

Anil,?
?
I'm in portland and i'm interested in talking to you about it.
?
Please give me a call when you get a moment.
?
Scott,
?
360.606.1106

1 - 9 of 9