Adding Remote Control Switches on Felder
开云体育Due to the discussion of some buying a new saw, thought I share few solutions members have come up with for adding wired and wireless control switches. Depending upon the location of control switches on your machine, this may be of interest. Wired Remote Start/Stop with Scoring Control Wireless Schneider Harmony based remote switch: Wireless Remote Start/Stop with Scoring Control Imran Malik IAM Wood Creations |
开云体育Hi Kevin,I assume you are asking me about my write-up of the many I shared. If so, I should be able to confirm, if you share the electrical schematic of your machine with me. You can share it here or send it privately by clicking, “Reply to Sender”, at bottom of the message. Imran Malik IAM Wood Creations On Mar 27, 2025, at 5:39?PM, Kevin Wells via groups.io <kjwells54@...> wrote:
? Imran, any idea if this will also work for a K3?
|
|
Thank you Imran. I'm attaching an image of the schematic/wiring diagram that came with the K3 Winner. Some have asked to keep this topic public in the event the solution will work for them. On Thu, Mar 27, 2025 at 3:03?PM imran via <imranwoodshop=[email protected]> wrote:
--
Kevin J. Wells |
开云体育Hi Kevin,I just get a black screen with menu option when I open the attachment on my iphone. Same result if I save it in files. Imran Malik IAM Wood Creations On Mar 28, 2025, at 3:25?PM, Kevin Wells via groups.io <kjwells54@...> wrote:
? Thank you Imran. I'm attaching an image of the schematic/wiring diagram that came with the K3 Winner. Some have asked to keep this topic public in the event the solution will work for them. On Thu, Mar 27, 2025 at 3:03?PM imran via <imranwoodshop=[email protected]> wrote:
Kevin J. Wells <Photo -K3 Schematic..htm> |
开云体育Photos are commonly attached. Be sure to save it in a picture format (jpg, png, etc) first. I see .htm extension, which may be the issue.Imran Malik IAM Wood Creations On Mar 28, 2025, at 3:27?PM, Kevin Wells via groups.io <kjwells54@...> wrote:
? It looks like the image doesn't load. Do I need a particular file type?
|
开云体育Hi Kevin, et al, Most likely it will work but the writeup will need to be updated for Hammer. I am happy to do that if someone provides pictures and needed details. The main difference is that the switches in your machine receive line AC voltage. The current version of the receiver I used, only states output relay capability as 10A @ 14VDC. I know most of these relays can handle AC and DC voltages, as shown in pic below. There are many available on Amazon but I prefer to buy from an established business. I have a message out to them to confirm relay capability. I will keep all posted. Imran Malik IAM Wood Creations On Mar 28, 2025, at 3:42?PM, Kevin Wells via groups.io <kjwells54@...> wrote:
? I made a folder in the Photos tab titled Hammer K3 Winner Schematic/Wiring diagram. I will also attach a .jpg here.
<20250328_121302.jpg> |
|
Thank you Imran. Let me know if there's anything I can provide. On Sat, Mar 29, 2025, 10:02?AM imran via <imranwoodshop=[email protected]> wrote:
|
imran
Kevin Wells
