开云体育

?

Just to be clear, I think you are asking how you may cause the proper dust gate to open, and the dust extractor to turn on when you turn on your AD-951. ?If that is correct, I can tell you that ? I use equipment from Grit Automation to automatically open the dust gate and turn on the dust collector. I also have an AD-951. It also automatically turns off the dust collector a short time after I turn off the AD-951.

?

You can view the suite of components that enable this to happen at . I've had this installed in my shop for about a year with excellent results. I don't know if this is available in Türkiye, but I am sure there other options that are available.

?

Grit sells a device, called a trigger, that is wired into the AD-951. ?It communicates with another device called a hub that is mounted on the wall in your shop. ?It is the brain of the system. ?It communicates with another trigger that is wired into the dust collector. ?It also communicates with dust gate control devices mounted to each dust gate. ?When the AD-951is turned of, the AD-951 trigger sends a signal to the hub. ?The hub then tells the trigger on the dust collector to turn on the dust collector, and open the gate assigned to the AD-951. ?When you turn off the AD-951, the reverse happens.

?

Triggers and gate controls are installed on each machine that uses the dust collector. ?Each trigger and gate control are independently managed by the hub so that only the correct gates are opened, while keeping all the others closed. ?Installation is easy, and the system is easy to program and maintain.

?

Good luck,

?

Alex B.

?

?