开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Topics

Reborn Felder owner / blade hoices

 

Hi Folks, It's been decades since I last posted on a Felder group. Regretting yet another cumbersome shop move, with great remorse, I sold my Felder K700. Since then, I set up a new small home shop, bought small machines, including a 3hp SawStop. Don't get me wrong, I like this saw, but it ain't a Felder. Missing my old saw, I decided to bite the bullet and purchase a new K700 with all the stuff I want.
I know it will take a while to get my new Felder. Eventually, I most likely will sell the SawStop.

On a different note: I am interested in hearing what people have to say about combination blades and which ones they like. In the past, I liked my Ghudo, but have heard good things about Ridge Carbide. What do you think about Felder's own brand?
 

I've been riding the Felder combo blade quote happily but decided next sharpening it's getting swapped out by the recommendations of many here - the Tenryu 300mm class of blades. I haven't put them on yet because I just received them today, but I like the ability to keep the scoring blade set up while swapping out the blades with the same kerf if I need to switch combo out to rip, or a specialty purpose. Pricing also quite reasonable from after navigating the strange way they list their tenryu offerings. I know the tenryu website lists all offerings but these 4 are in that system. 300-dia / 28-tooth count / cbd3 tooth arrangement is format of part #.?

IW-30028CBD3 300mm
IW-30050CBD3 300mm
IW-300100AB3 300mm
IW-300100D3 300mm


On Wed, Jul 28, 2021, 9:42 PM <ecohentoo@...> wrote:
Hi Folks, It's been decades since I last posted on a Felder group. Regretting yet another cumbersome shop move, with great remorse, I sold my Felder K700. Since then, I set up a new small home shop, bought small machines, including a 3hp SawStop. Don't get me wrong, I like this saw, but it ain't a Felder. Missing my old saw, I decided to bite the bullet and purchase a new K700 with all the stuff I want.
I know it will take a while to get my new Felder. Eventually, I most likely will sell the SawStop.

On a different note: I am interested in hearing what people have to say about combination blades and which ones they like. In the past, I liked my Ghudo, but have heard good things about Ridge Carbide. What do you think about Felder's own brand?

 

开云体育

What is your name? ? Why don’t you people sign your posts? ? There are tons of posts in the archive about saw blade preferences. ?Search prior posts please.

David Best






On Jul 28, 2021, at 7:39 PM, ecohentoo@... wrote:

Hi Folks, It's been decades since I last posted on a Felder group. Regretting yet another cumbersome shop move, with great remorse, I sold my Felder K700. Since then, I set up a new small home shop, bought small machines, including a 3hp SawStop. Don't get me wrong, I like this saw, but it ain't a Felder. Missing my old saw, I decided to bite the bullet and purchase a new K700 with all the stuff I want.
I know it will take a while to get my new Felder. Eventually, I most likely will sell the SawStop.

On a different note: I am interested in hearing what people have to say about combination blades and which ones they like. In the past, I liked my Ghudo, but have heard good things about Ridge Carbide. What do you think about Felder's own brand?

 

开云体育

I have ?a few Freud LU2A21 (48atb) and a few other tooth configs of the same line, they are very good with no complaints.?
I was told by A Felder tech that the Felder Silent power blades were the same and made by Freud and leitz, have a silent power 48 and other than markings look almost if not identical to the Freud.

Regards, Mark

On Jul 28, 2021, at 10:42 PM, ecohentoo@... wrote:

?Hi Folks, It's been decades since I last posted on a Felder group. Regretting yet another cumbersome shop move, with great remorse, I sold my Felder K700. Since then, I set up a new small home shop, bought small machines, including a 3hp SawStop. Don't get me wrong, I like this saw, but it ain't a Felder. Missing my old saw, I decided to bite the bullet and purchase a new K700 with all the stuff I want.
I know it will take a while to get my new Felder. Eventually, I most likely will sell the SawStop.

On a different note: I am interested in hearing what people have to say about combination blades and which ones they like. In the past, I liked my Ghudo, but have heard good things about Ridge Carbide. What do you think about Felder's own brand?

 

Sorry David,

This was my first post and I wanted to share and inquire.

Ed Cohen?
 

Hi Ed, your question is about blades but you mention interest in a K700 so I thought I would mention a Facebook marketplace post for a K700S that is a few months old. Seller is asking $11,500, located in WV. No affiliation with the seller.

https://www.facebook.com/marketplace/item/788095088424953/
 

开云体育

I paid 11,500 for a k700s 9’ with overhead guard in 2019…

Regards, Mark

On Jul 29, 2021, at 8:53 AM, jbowen@... wrote:

?Hi Ed, your question is about blades but you mention interest in a K700 so I thought I would mention a Facebook marketplace post for a K700S that is a few months old. Seller is asking $11,500, located in WV. No affiliation with the seller.

https://www.facebook.com/marketplace/item/788095088424953/

 

I appreciate the input. Although Market Place Felder seems like an awesome deal, I will stick to my decision. I am curious as to why someone is selling a saw just a few months old. However, my shop is small and the K700 that I bought will be a good fit. Because of the nature of the work that I do, I prefer not to have a large outrigger. Felder gave me some nice incentives to purchase now.?


On Thu, Jul 29, 2021, 9:21 AM Mark Kessler <mkessler10@...> wrote:
I paid 11,500 for a k700s 9’ with overhead guard in 2019…

Regards, Mark

On Jul 29, 2021, at 8:53 AM, jbowen@... wrote:

?Hi Ed, your question is about blades but you mention interest in a K700 so I thought I would mention a Facebook marketplace post for a K700S that is a few months old. Seller is asking $11,500, located in WV. No affiliation with the seller.

1 - 8 of 8