All,

This was only machine I did not sell last year when leaving New Orleans. ?We are moving again and I have nowhere to put it so it goes and all the tooling and accessories go with it for $5500.00

I no longer have a shop or tools to pack for shipping so local pick up is required. ?The Rong Fu is bolted to a pallet with some packing crating around it but the tool chest is not on a pallet. ?It is ready to go for pick up but not crated well enough for LTL shipping.

I listed it on Craigslist in Bend, Oregon ?The link is below.

https://bend.craigslist.org/tls/d/bend-rong-fu-rf45-square-column-geared/7333325449.html

It is such a versatile and handy machine I thought I would continue to use it but that is not to be. ?There has been much discussion of the Rong FU RF45 on the FOG over the years. ?The RONG FU makes a great substitute for a drill press and there is a woodworking drilling table included that mounts in the Kurt vice so switching from metal work to wood drilling and machining is very quick.

I replaced the original single phase motor of this machine with a three phase motor and a VFD for variable speed. ?I think there was discussion of how to do this on the FOG when I did it. ?The power feed for the x-axis is very nice and the DRO for the X/Y axis and the z axis really make the machine a joy to use.

Joe

--

开云体育

Dave,

开云体育

Hi Joe,

??? I might be interested.? How heavy is it?? Do you have access to something the could load the pallet into a pickup or on to a flatbed?

Dave,

It would have saved a lot of work to sell it to you last year. ?

Joe

On Jun 7, 2021, at 4:15 PM, David Davies <myfinishingtouch@...> wrote:

?

Oh sure...now you want to sell it.? Not when I could have picked it up in New Orleans...ah well I got an Incra instead.

Dave Davies

On Mon, Jun 7, 2021 at 5:55 PM bacchus6015 via <joeinno=[email protected]> wrote:

All,

This was only machine I did not sell last year when leaving New Orleans.? We are moving again and I have nowhere to put it so it goes and all the tooling and accessories go with it for $5500.00

I no longer have a shop or tools to pack for shipping so local pick up is required.? The Rong Fu is bolted to a pallet with some packing crating around it but the tool chest is not on a pallet.? It is ready to go for pick up but not crated well enough for LTL shipping.

I listed it on Craigslist in Bend, Oregon ?The link is below.



It is such a versatile and handy machine I thought I would continue to use it but that is not to be.? There has been much discussion of the Rong FU RF45 on the FOG over the years.? The RONG FU makes a great substitute for a drill press and there is a woodworking drilling table included that mounts in the Kurt vice so switching from metal work to wood drilling and machining is very quick.

I replaced the original single phase motor of this machine with a three phase motor and a VFD for variable speed.? I think there was discussion of how to do this on the FOG when I did it.? The power feed for the x-axis is very nice and the DRO for the X/Y axis and the z axis really make the machine a joy to use.

Joe

<IMG_1391.JPG>

--

Dave & Marie Davies

318-219-7868

-- 
Michael Garrison Stuber

Where is the machine located?

开云体育

All,