开云体育

Sliding Table Bearings

#6Series

Matthew Jeppson All Messages By This Member #116715 I am restoring a BF 6-41 and the sliding table bearings need to be replaced. ?Any suggestions on were I can source them? ?The bearings are cylindrical (6x8mm). I have included a picture of the bearings and associated housing. ?Thanks in advance for the help/suggestions. Best, Rhett IMG_0825.jpeg IMG_0820.gif
SADY WORKS All Messages By This Member #116716 开云体育 Have you looked at McMaster carr? toggle quoted message Show quoted text On Jun 7, 2021, at 3:51 PM, mrjeppson@... wrote: ?I am restoring a BF 6-41 and the sliding table bearings need to be replaced. ?Any suggestions on were I can source them? ?The bearings are cylindrical (6x8mm). I have included a picture of the bearings and associated housing. ?Thanks in advance for the help/suggestions. Best, Rhett <IMG_0825.jpeg> <IMG_0820.gif>
imran All Messages By This Member #116717 Edited I recently replaced the plastic carrier and all bearings on a newer (compared to 6 series ) K975. The bearings were little over a buck each from Felder. If you have not yet inquired availability with Felder, I would start there. ? Imran On Jun 7, 2021, at 3:51 PM, mrjeppson@... wrote: I am restoring a BF 6-41 and the sliding table bearings need to be replaced. ?Any suggestions on were I can source them? ?The bearings are cylindrical (6x8mm). I have included a picture of the bearings and associated housing. ?Thanks in advance for the help/suggestions. Best, Rhett <IMG_0825.jpeg> <IMG_0820.gif>
Brian Lamb All Messages By This Member #116718 开云体育 Search out “cross roller linear bearing” and you will find them. I would contact a large bearing house and ask, I suspect they will be able to get them for you. Here is a link to the THK website showing them, I assume you can get the rollers without having to buy the rails.?? Schneeberger is another good brand. Brian Lamb blamb11@... www.lambtoolworks.com toggle quoted message Show quoted text On Jun 7, 2021, at 11:13 AM, mrjeppson@... wrote: I am restoring a BF 6-41 and the sliding table bearings need to be replaced. ?Any suggestions on were I can source them? ?The bearings are cylindrical (6x8mm). I have included a picture of the bearings and associated housing. ?Thanks in advance for the help/suggestions. Best, Rhett <IMG_0825.jpeg><IMG_0820.gif>

Previous Topic Next Topic