开云体育

Felder 40mm cutter profile head

Chris Perren All Messages By This Member #111269 开云体育 I’ve received a Felder 40mm profile cutter head as shown in the attached images. ?My 55mm Whitehill profile head uses 55mm knives although the slots holding the cutters are similar dimensions as my Felder 40mm head .? Any reason I should not use 55mm knives in my 40mm Felder head? Thoughts? ???? ? Regards, ? Chris Perren 512-415-6951 ? IMG_1363.jpg IMG_1362.jpg
Airtight: Clamps by Air Compression All Messages By This Member #111272 开云体育 Chris, as long as holes match up there would be 7.5 overhang ,, no issue at all but I would ask whitall what they think there ?is a rule of thumb, based on knife thickness just don’t remember what it is, Rengate or Schmidt would be better qualified , I am going by my experience only with 60 degree corrugated. Although I do have a few of those heads. Ther is also rule of thumb for knife thickness to knife extension past cutter body. Mac,,, martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330?cell airtightclamps@... Designing and building for 50 years toggle quoted message Show quoted text On Nov 15, 2020, at 8:18 PM, Chris Perren <cperren@...> wrote: ? I’ve received a Felder 40mm profile cutter head as shown in the attached images. ?My 55mm Whitehill profile head uses 55mm knives although the slots holding the cutters are similar dimensions as my Felder 40mm head .? Any reason I should not use 55mm knives in my 40mm Felder head? Thoughts? ???? ? Regards, ? Chris Perren 512-415-6951 ? <IMG_1363.jpg> <IMG_1362.jpg>
imran All Messages By This Member #111273 开云体育 Chris, ASAIK, you can use 40mm or 50mm blades/limiters in the larger felder universal safety cutter head. the smaller felder universal safety cutterhead only uses 40mm blades. i assume that only a small portion of the blade can be unsupported. hope this is helpful. imran? toggle quoted message Show quoted text On Nov 15, 2020, at 9:18 PM, Chris Perren <cperren@...> wrote: ? I’ve received a Felder 40mm profile cutter head as shown in the attached images. ?My 55mm Whitehill profile head uses 55mm knives although the slots holding the cutters are similar dimensions as my Felder 40mm head .? Any reason I should not use 55mm knives in my 40mm Felder head? Thoughts? ???? ? Regards, ? Chris Perren 512-415-6951 ? <IMG_1363.jpg> <IMG_1362.jpg>

Previous Topic Next Topic