开云体育

Shark Universal Overhead Guard Model S-12S

Robert Johnson All Messages By This Member #110906 I received a message from Harvey doing an intro offer on their saw guard.? At first look, it appears to be a reasonable copy of the others where have seen here, and takes 12" blades and 52" cutting width.? As I recall my 2004 KF 700s has a 51" cutting width.? At $949.00 + SST may be competitive.? I am getting too old to be an early adapter, but I'd like a better blade guard and dust collector. I'd appreciate feedback.
David Kumm All Messages By This Member #110907 开云体育 I looked at the harvey guard some years ago because I though I could fit it on my old Robinson.? I'm not sure it will handle a 16" blade or a 12" with scoring.? If no scoring, it should work.? Dave toggle quoted message Show quoted text From: [email protected] <[email protected]> on behalf of Robert Johnson <woodewe@...> Sent: Friday, October 30, 2020 12:42 PM To: [email protected] <[email protected]> Subject: [FOG] Shark Universal Overhead Guard Model S-12S ? I received a message from Harvey doing an intro offer on their saw guard.? At first look, it appears to be a reasonable copy of the others where have seen here, and takes 12" blades and 52" cutting width.? As I recall my 2004 KF 700s has a 51" cutting width.? At $949.00 + SST may be competitive.? I am getting too old to be an early adapter, but I'd like a better blade guard and dust collector. I'd appreciate feedback.
Robert Johnson All Messages By This Member #110912 I checked with Harvey and with the 52" width, the 1-inch over the 51" width for the Felder should be okay theoretically giving room for a 1" dado, and more so with the tilting blade cover.
Robert Johnson All Messages By This Member #110924 This style of guard and collector was the subject of much discussion not long ago. The seed was planted that I needed a better way for my shop. How does this unit compete when priced at $950 with shipping, less taxes to the versions that are available?
imran All Messages By This Member #110926 开云体育 there was another nice looking one that was shared in that discussion sometime ago but IIRC it needed to be ordered from china. don’t recall if the poster got it or not. i believe one from grizzly was also being considered. imran toggle quoted message Show quoted text On Oct 31, 2020, at 3:48 PM, Robert Johnson <woodewe@...> wrote: ?This style of guard and collector was the subject of much discussion not long ago. The seed was planted that I needed a better way for my shop. How does this unit compete when priced at $950 with shipping, less taxes to the versions that are available?
Robert Johnson All Messages By This Member #110932 Hi Imran, I believe I was the one mentioned going to look at it as I don't too far from Grizzly NW in Bellingham.? When I called, the person I talked to see if there was one on the floor he said thought so, but when asked about buying one, he did not find a part number for the entire unit.? That could mean it would be ordered part by part.? I expect the coast would be excessive, based on the usual cost of spare parts, and asked he please get more information.? I never received a reply, so I expected that it was a dead end, hence my interest in the Harvey unit when it turned up.? Scott and Sargent offers? I-TECH OVERHEAD SAW GUARD ASSEMBLY Part Number?ITWMPSGD for 595BP, plus shipping and possible fees and duty.? It appeared workable, but little information on mounting, no user review, and uncertainty on how it would " modified to fit...", I lost interest.?? The Harvey unit seems to have most all of the desired features; gas strut to help raise the hood, swivel away boom, crank adjustable hood height, a 6-way knuckle to align hood and support post to the saw, and fairly simple install instructions (drill three holes).... what am I missing? -Bob
imran All Messages By This Member #110934 开云体育 Hi Robert, Sangluu used grizzly guard only. not sure if that would work for you. see this thread. /g/felderownersgroup/message/107590 imran? toggle quoted message Show quoted text On Oct 31, 2020, at 8:37 PM, Robert Johnson <woodewe@...> wrote: ? Hi Imran, I believe I was the one mentioned going to look at it as I don't too far from Grizzly NW in Bellingham.? When I called, the person I talked to see if there was one on the floor he said thought so, but when asked about buying one, he did not find a part number for the entire unit.? That could mean it would be ordered part by part.? I expect the coast would be excessive, based on the usual cost of spare parts, and asked he please get more information.? I never received a reply, so I expected that it was a dead end, hence my interest in the Harvey unit when it turned up.? Scott and Sargent offers? I-TECH OVERHEAD SAW GUARD ASSEMBLY Part Number?ITWMPSGD for 595BP, plus shipping and possible fees and duty.? It appeared workable, but little information on mounting, no user review, and uncertainty on how it would " modified to fit...", I lost interest.?? The Harvey unit seems to have most all of the desired features; gas strut to help raise the hood, swivel away boom, crank adjustable hood height, a 6-way knuckle to align hood and support post to the saw, and fairly simple install instructions (drill three holes).... what am I missing? -Bob
Bruce Gordon All Messages By This Member #114001 Hi Robert, Did you end up getting the overhead guard? I'm thinking about purchasing a used Minimax si 315 that comes with a crappy plastic riving knife guard, I definitely want to get something better. I'm waiting on a price from SCM for the optional one that you can order with the Minimax but when I came across the Harvey one it looks like a good option if the SCM one is overpriced. -Bruce
Robert Johnson All Messages By This Member #114010 The short answer is no.? Unfortunately I sustained two fall in the house and mangled my shoulders and can't do much right now.? I do expect based on moving the parts into the shop and looking over the install, that is will work well and is well priced.? And I expect it will work well, but need to to a trial run. Hope this helps.? If you were in my area perhaps you would do the install and test for a reasonable fee? ;-). Bob
Drew Tosh All Messages By This Member #114011 I have one ordered, mounting it to a C-31.? I Will share when I have that in hand and installed.? Estimated to ship mid Feb.
Joe Jensen All Messages By This Member #114013 开云体育 I modified my riving knife guard and I love it. I opened the top up and shaped a steel transition to fit it well.? ? ? ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Bruce Gordon Sent: Monday, February 8, 2021 9:02 AM To: [email protected] Subject: Re: [FOG] Shark Universal Overhead Guard Model S-12S ? Hi Robert, Did you end up getting the overhead guard? I'm thinking about purchasing a used Minimax si 315 that comes with a crappy plastic riving knife guard, I definitely want to get something better. I'm waiting on a price from SCM for the optional one that you can order with the Minimax but when I came across the Harvey one it looks like a good option if the SCM one is overpriced. -Bruce Modifying a Felder blade guard to improve dust collection.pdf Modifying a Felder blade guard to improve dust collection.pdf
David Davies All Messages By This Member #114014 I had the Shark Guard on my KF before I sold the saw.? Clearance with the pneumatic clamps is an issue.? Joe reports that his mod helps.? The other option is to make something like David posted a little while ago. Dave Davies toggle quoted message Show quoted text On Mon, Feb 8, 2021 at 3:40 PM Joe Jensen <joe.jensen@...> wrote: I modified my riving knife guard and I love it. I opened the top up and shaped a steel transition to fit it well.? ? ? ? From: [email protected] <[email protected]> On Behalf Of Bruce Gordon Sent: Monday, February 8, 2021 9:02 AM To: [email protected] Subject: Re: [FOG] Shark Universal Overhead Guard Model S-12S ? Hi Robert, Did you end up getting the overhead guard? I'm thinking about purchasing a used Minimax si 315 that comes with a crappy plastic riving knife guard, I definitely want to get something better. I'm waiting on a price from SCM for the optional one that you can order with the Minimax but when I came across the Harvey one it looks like a good option if the SCM one is overpriced. -Bruce -- Dave & Marie Davies 318-219-7868
Joe Jensen All Messages By This Member #114015 开云体育 If I ever remake mine I will have even? more clearance for the clamps.? It was a bit of an afterthought in this version. ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of David Davies Sent: Monday, February 8, 2021 2:49 PM To: [email protected] Subject: Re: [FOG] Shark Universal Overhead Guard Model S-12S ? I had the Shark Guard on my KF before I sold the saw.? Clearance with the pneumatic clamps is an issue.? Joe reports that his mod helps.? The other option is to make something like David posted a little while ago. Dave Davies ? On Mon, Feb 8, 2021 at 3:40 PM Joe Jensen <joe.jensen@...> wrote: I modified my riving knife guard and I love it. I opened the top up and shaped a steel transition to fit it well.? ? ? ? From: [email protected] <[email protected]> On Behalf Of Bruce Gordon Sent: Monday, February 8, 2021 9:02 AM To: [email protected] Subject: Re: [FOG] Shark Universal Overhead Guard Model S-12S ? Hi Robert, Did you end up getting the overhead guard? I'm thinking about purchasing a used Minimax si 315 that comes with a crappy plastic riving knife guard, I definitely want to get something better. I'm waiting on a price from SCM for the optional one that you can order with the Minimax but when I came across the Harvey one it looks like a good option if the SCM one is overpriced. -Bruce ? -- Dave & Marie Davies 318-219-7868
Bruce Gordon All Messages By This Member #114029 Sorry to hear about your shoulder injury Robert, if I was closer I'd be happy to help. Joe, nice idea on your modification. -Bruce

Previous Topic Next Topic