开云体育

Same answer. David Best - via mobile phone

If it is the same motor as my Hammer J/P, it should be 4HP and 3KW. A 20A breaker should be sufficient (Felder told me I can use either 20 or 30A breaker)

Yes, it is single phase. I don't know the size of the motor. I assume (perhaps erroneously) that the 531s all came with the same size motor. (Unfortunately, the unit itself is in storage and I won't

Hi David, I was suggesting +0/-0.001” (1 mil) not +/-1.0 mm. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

You guys are kidding yourself. +/-1.0 mm would be more sloppy than the original Felder unit. The required spec is +/- 0.01mm or better. What I produced was +/-0.0003-inches or +/- 0.008mm otherwise I

Hi Nate, David be the best to tell us if it is worthwhile to relax the 1/2 mil spec (between the bushing and the counterbore in t-nut), which is hard to meet. I would be worthwhile to know the effect

Are we familiar with any metal show that is willing to produce something with a tolerance of 0.01mm?

Hi Chris, Well I shared this on my FB page and there is interest for 16 pieces. Probably not enough but anyone willing to take up this project? Imran Malik

What size motor does it have? From your details, I assume it is single phase. Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

A first post with a simple question: How large an electrical circuit is required for this machine? I should soon take possession and want to know if I need to add another circuit in my shop. My

David: I have been on the same journey and looked everywhere for models. Finally, I got the dimensional drawings of most of the equipment I have, along with the equipment I will order. Then I drew the

Thank you. now just have to figure out how to import them to sketch-up

Felder can provide you with dimensioned drawings of all their machines in PDF format. They will not release the 3D models, but I can confirm that they were created in Siemens NX which wouldn’t help

Been building my man cave for a while now. Like to think i'm in the home stretch of building anyways. Still have plumbing and flooring to pour. Yes, pex will be laid out for hydronic heating. Once in

Here is my order from this year and see the DNSP note (circled). I have never had to contest it but if they do not follow the quote, I will definitely ask for a refund. Imran Malik

Aaron, I have always said NO to the air shipment charge from Europe and opted for the 4-6 week delay. Which means that the parts come on the scheduled monthly shipment. I also make sure that the quote

In my experience, if you don't do the $70 DHL option, any small parts orders may or may not ever get to you. -Aaron

SW, Things that come directly from Austria have the 'DHL' shipping charge of $70 min I was told yesterday.? If you opt for the 8-12 week version, you get UPS ground rates from Delaware.? They must

Hi Shinta, If it is the LCD screen and the segments are garbled or there is contamination within then you have to replace the LCD. The display can be in DIP (dual in line package) package, which is

There used to be a plastic film that protect the LCD plastic from scratch when the saw first shipped.? I removed that after the saw was commissioned a long time ago.? I don't remember if there was