开云体育

Hell, I cut the board twice and it’s still short!

I think I have perfected the process of being 1 inch short.

i am planning to order this for chip collection at the drill press, unless i hear otherwise https://www.grizzly.com/products/Grizzly-Dust-Collection-Nozzle-Stand-Floor/G2754 also getting this for use

Imran i used to burn the inch all the time back in the day. I don't know much now so that is not my problem. maybe age? Like the saying goes Measure twice, cut once.....and im my case its still short.

Glen, sometimes for accuracy i do not use the hook and use the 1” mark. i have come precisely 1” short more than once ? imran

Those guys who build the hangars for those Silent Super Top Secret Black CIA helicopters? ? They are? ridiculously? expensive aren't they.

Hum all my tapes are fine, my eye sight is the problem. I have been finding myself cutting a lot of things an inch short, I Don't know why. This could be the beginning to my end, or the fire Glen

As long as all tapes and rulers etc in my shop read the same, I’m good with it. Bill Belanger rohrabacher@...> wrote:

LOL. i can by me a lifetime supply of tape measures for the price of one calibration station. granted i cannot be sure if it is with a mil but marking errors can be bigger. i am just surprised that

I recall some dialog about how tape measures al such? they? get printed poorly? sometimes the printing is? out of place and yadda yadda yadda Well?? would you buy a tape if it was?? NIST

Paul, there could be several things at play but if all settings (rip fence toe out, slider trajectory, xcut fence 90 deg registration) are good and rip fence is pulled back then i personally will look

Paul, “If I move the rip fence close to the blade, say 50mm, the table slide becomes very stiff in the middle of its run. What gives?” I assume by table slide, you mean slider. if so, are you

If I move the? rip fence close to the blade, say 50mm, the table slide becomes very stiff in the middle of its run. What gives? I have a further problem which I keep putting off. If I tilt the blade

Thanks Mark. The equipment is located in Mount Pleasant MI and I am located in NC but will be at the Michigan location hopefully during the Labor Day week to show the equipment. -- John Wright

I use SG too, especially in my planer when the wood starts stalling. I turn it off, lower the bed, squirt some in and wipe around with a paper towel and the rest of the job sails through. Mike Ward

John, i am sorry to hear of your loss. where are you located. if you are close i can help with putting the sale info together. i guess if you are far from me and no one local is available i can help

This is a beautiful shop. My equipment is of the same vintage and your looks great. I sure wish you luck. CHS

John, sorry to hear of your loss. This is likely the best place to market the machines. Others will have a better idea than I on price. One thing that will help is to post what City/town the equipment

New member so excuse what I don't know, yet lol.? My Father-in-law recently passed away and we are trying to determine the value of the Felder equipment he had in his shop. I spoke with Felder Sales

Light spray and use. You can wipe if you want but I don't anymore unless it's the end of a job getting ready for the next. Imran I haven't used anything but SG and have no issues with rust though I