¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: Anyone know where I can get a hold of Gary M Katz DVD or books?

Finners
 

Cheers Lance. I¡¯m in Europe so was hoping for a digital download or ebook but I think I may need to bite the bullet and pay the fees


Re: Anyone know where I can get a hold of Gary M Katz DVD or books?

 





Scroll down for choices...

Happy hunting,

Lance


On Thursday, December 30, 2021, 02:31:02 PM PST, Finners <finnian.dawson@...> wrote:


Anyone know how I can get the dvds from Gary M ?Katz, particularly those on wainscoting and panelling? Also interested in his books on trim carpentry


Anyone know where I can get a hold of Gary M Katz DVD or books?

Finners
 

Anyone know how I can get the dvds from Gary M ?Katz, particularly those on wainscoting and panelling? Also interested in his books on trim carpentry


Re: 3d Dro stop

 

Thanks Brian, that notched version is exactly what I needed.
Thanks!

BB


On Thu, Dec 30, 2021 at 1:08 PM Brian Lamb <blamb11@...> wrote:
Bill, I created a notched version and loaded it on the website. See if that works for you.

Brian Lamb
blamb11@...





On Dec 30, 2021, at 12:12 PM, Bill B¨¦langer <Bllblngr@...> wrote:

In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer <Screen Shot 2021-12-30 at 12.06.50.png>


Re: Digital Rip Fence mod on K500

 

Here are some pictures:






Thanks,

Bill


Re: 3d Dro stop

 

Thanks Brian,
Yes the picture I show is mirrored and I was hoping someone had the file in the correct orientation.
It's not the original file in the files section, but one that I was starting to correct. Maybe I somehow mirrored it when I imported it?
If you have the right one, I would appreciate it.
Thanks
Bill B


On Thu, Dec 30, 2021 at 1:00 PM Brian Lamb <blamb11@...> wrote:
I have the STL, but it¡¯s opposite the way you show. Did you by chance mirror image the file at some point? Worst case, tell me how thick and wide the notch you want cut out of it and I¡¯ll do it for you.

Brian Lamb
blamb11@...





On Dec 30, 2021, at 12:12 PM, Bill B¨¦langer <Bllblngr@...> wrote:

In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer <Screen Shot 2021-12-30 at 12.06.50.png>


Re: Digital Rip Fence mod on K500

 

¿ªÔÆÌåÓý

Take some pictures of the fence housing on the bar so we can see what sort of room and position you need. Shouldn¡¯t be hard to come up with something.

Brian Lamb
blamb11@...
www.lambtoolworks.com




On Dec 30, 2021, at 1:03 PM, Bill James via <xxrb2010@...> wrote:

Thanks,

After having cut the parts, drill holes in the housing fence, I realized that the fence is way way too small to use machine screws from inside to outside. Also the fence housing is way too close to the saw scale for the solution in the video. The sensor is bigger than the space you have between the housing and the saw scale.
It seems that the only way to mount the sensor is either under the actual fence or to the side of the housing using a custom made block to get everything dial in within the 1 mm margin as well as the 1 degree margin.

On this saw, it looks like the basic wixey solution attaching on the side is the easy way to go.

Bill


Re: 3d Dro stop

 

¿ªÔÆÌåÓý

Bill, I created a notched version and loaded it on the website. See if that works for you.

Brian Lamb
blamb11@...
www.lambtoolworks.com




On Dec 30, 2021, at 12:12 PM, Bill B¨¦langer <Bllblngr@...> wrote:

In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer <Screen Shot 2021-12-30 at 12.06.50.png>


Re: Digital Rip Fence mod on K500

 

Thanks,

After having cut the parts, drill holes in the housing fence, I realized that the fence is way way too small to use machine screws from inside to outside. Also the fence housing is way too close to the saw scale for the solution in the video. The sensor is bigger than the space you have between the housing and the saw scale.
It seems that the only way to mount the sensor is either under the actual fence or to the side of the housing using a custom made block to get everything dial in within the 1 mm margin as well as the 1 degree margin.

On this saw, it looks like the basic wixey solution attaching on the side is the easy way to go.

Bill


Re: 3d Dro stop

 

¿ªÔÆÌåÓý

I have the STL, but it¡¯s opposite the way you show. Did you by chance mirror image the file at some point? Worst case, tell me how thick and wide the notch you want cut out of it and I¡¯ll do it for you.

Brian Lamb
blamb11@...
www.lambtoolworks.com




On Dec 30, 2021, at 12:12 PM, Bill B¨¦langer <Bllblngr@...> wrote:

In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer <Screen Shot 2021-12-30 at 12.06.50.png>


Re: 3d Dro stop

 

Thanks so much David. Nice stuff!
What I was looking for was an STL file that I could print in nylon.

Bill B¨¦langer


On Thu, Dec 30, 2021 at 12:31 PM david@... via <david=[email protected]> wrote:


David Best - via mobile phone?

On Dec 30, 2021, at 11:12 AM, Bill B¨¦langer <bllblngr@...> wrote:

?In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer


Re: 3d Dro stop

 

¿ªÔÆÌåÓý



David Best - via mobile phone?

On Dec 30, 2021, at 11:12 AM, Bill B¨¦langer <bllblngr@...> wrote:

?In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer


3d Dro stop

 

In looking at the 3D files, I find a DRO version of a fence attachment. I'm trying to redesign it to fit my Kappa 400 fence, but maybe someone else has already done this?
The post is on the wrong side for me, it should be on the left with the angle facing me. Is there another file that allows the block to go under the dust hood?
Don't need to reinvent the wheel...
Thanks
Bill B¨¦langer


Re: Digital Rip Fence mod on K500

 

¿ªÔÆÌåÓý

You don¡¯t have to use the cover strip, but it does protect the soft magnetic layer. I would use it.

Brian Lamb
blamb11@...
www.lambtoolworks.com




On Dec 30, 2021, at 12:03 PM, Bill James via <xxrb2010@...> wrote:

Stupid question about the magnetic strip,

The product comes with two strips, one thick that is supposed to the magnetic strip and one thin that is supposed to be a cover strip for protection.

I guess I have to install the magnetic strip first and then add the stainless steel cover strip on top of it? I also wonder whether I need the protective strip or for this application this is not needed?

Thanks,

Bill


Re: Digital Rip Fence mod on K500

 

Stupid question about the magnetic strip,

The product comes with two strips, one thick that is supposed to the magnetic strip and one thin that is supposed to be a cover strip for protection.

I guess I have to install the magnetic strip first and then add the stainless steel cover strip on top of it? I also wonder whether I need the protective strip or for this application this is not needed?

Thanks,

Bill


Re: Massive Glue Up

 

Massive, yes. I feel sorry for the hinges ;-)
Cheers
Eric

On Thu, Dec 30, 2021 at 10:52 AM Tim House <casabueno@...> wrote:
Nice project!? Those "square cuts" certainly assist on the glue up and joint fit. Please post a photo of the completed door(s).

Tim House

On Thu, Dec 30, 2021 at 9:11 AM imranindiana via <imranindiana=[email protected]> wrote:
Well massive for my hobby shop anyways. Two of my long flattest surfaces in the shop (10¡¯ slider and 9.5¡¯ jointer w/ext tables) in use for glueup of first door panel - 148¡± x 72¡±.

Just used blocks attached to the OSB under each rails and shims to push the rails into stile. Credit to Felder machinery the final corner to corner measurement is only off by 1/32¡±.

Now, I will rest easy if the other stile will go in with 6 floating tenons.



Imran






Re: Massive Glue Up

 

Thanks Tim. Will share when done. Wife excepts it finished by May. Will see, I have my doubts.

Imran

On Dec 30, 2021, at 12:52 PM, Tim House <casabueno@...> wrote:


Re: Massive Glue Up

 

Nice project!? Those "square cuts" certainly assist on the glue up and joint fit. Please post a photo of the completed door(s).

Tim House


On Thu, Dec 30, 2021 at 9:11 AM imranindiana via <imranindiana=[email protected]> wrote:
Well massive for my hobby shop anyways. Two of my long flattest surfaces in the shop (10¡¯ slider and 9.5¡¯ jointer w/ext tables) in use for glueup of first door panel - 148¡± x 72¡±.

Just used blocks attached to the OSB under each rails and shims to push the rails into stile. Credit to Felder machinery the final corner to corner measurement is only off by 1/32¡±.

Now, I will rest easy if the other stile will go in with 6 floating tenons.



Imran






Re: Massive Glue Up

 

Joinery detail


Massive Glue Up

 
Edited

?Well massive for my hobby shop anyways. Two of my long flattest surfaces in the shop (10¡¯ slider and 9.5¡¯ jointer w/ext tables) in use for glueup of first door panel - 148¡± x 72¡±.

Just used blocks attached to the OSB under each rail and used shims to push the rails into the stile. Credit to Felder machinery the final corner to corner measurement is only off by 1/32¡±.

Now, I will rest easy if the other stile will go in with 6 floating tenons.

Imran