开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
Date

Re: 4 new 410mm/16” Centrostar jointer/planer blades available cheap

 

开云体育

Yes if they are still available I would like to purchase them !
Thanks Van


On Oct 28, 2020, at 5:32 PM, mattkeimartworks@... wrote:

?I just went to install a new set of blades on my AD741 jointer/planer and 4 of the 6 blades shipped to me are the wrong part number. ?I am going to call Oella Saw and Tool but I bought them 2 years ago so I doubt a swap will be possible. ?They appear to be for?Wigo / Laguna AT970410W According to their web site. ?Anyone need these?

On the actual package
part number 114777, HSS 410mm, 18%/T1, system Centrostar
also has number FAO170213


Re: Shop Tour

 

Yes, I'm leasing. Industrial space in Bridgeport, CT is relatively reasonable, plus the landlord was motivated to make a deal, so I got more space than I really needed. But, as nature hates a vacuum, I managed to fill it up.

--
Kerry Smith
Gotham Woodworks
www.gothamwoodworks.com


Re: Shop Tour

 

If you ask my wife she would tell you that I kind of do do it for a living. The vacuum press is made by Columbus Tech in Austria (columbus-tech.com). It has a rubber membrane that can stretch to about 36" for bent laminations and form work. It runs on a Becker pump and has a pretty big air tank. It's mobile and as you can see in the video the top flips up so it doesn't eat up real estate when not in use. I didn't want to deal with bags and I felt the flip top tables widely available over here seemed kind of flimsy, especially for the price. This one was not cheap (about $10k + freight, etc.) but it is of super high quality and will likely hold it's value.?

--
Kerry Smith
Gotham Woodworks
www.gothamwoodworks.com


Re: Shop Tour

 

Awesome!


Re: Shop Tour

 

开云体育

Beautiful shop.? Thanks for sharing!

?

From: [email protected] [mailto:[email protected]] On Behalf Of Kerryj_smith
Sent: Wednesday, October 28, 2020 8:12 PM
To: [email protected]
Subject: [FOG] Shop Tour

?

Well, I got the shop as clean as it is going to get for the next several months so I thought I shoot a tour for a client. Here's a link to the video for those who are interested.


--
Kerry Smith
Gotham Woodworks
www.gothamwoodworks.com


Re: Shop Tour

 

Your parting comment surprised me...I don't do this for a living.? You'd never guess that from your shop.? Are you leasing the shop?
Dave Davies

On Wed, Oct 28, 2020 at 10:37 PM Jason Holtz <jholtzy@...> wrote:
Nice shop tour Kerry. Sure looks like you do it for a living.

Tell me more about your veneer press. Never heard of that one, and I like Austrian gear.

Jason Holtz
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406
612.432.2765

--
Jason
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406



--
Dave & Marie Davies

318-219-7868


Re: Shop Tour

 

Nice shop tour Kerry. Sure looks like you do it for a living.

Tell me more about your veneer press. Never heard of that one, and I like Austrian gear.

Jason Holtz
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406
612.432.2765

--
Jason
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406


Shop Tour

 

Well, I got the shop as clean as it is going to get for the next several months so I thought I shoot a tour for a client. Here's a link to the video for those who are interested.


--
Kerry Smith
Gotham Woodworks
www.gothamwoodworks.com


Re: 3D printer usage for wood shop

 


Thanks!

Bill Bélanger?


On Wed, Oct 28, 2020 at 20:00 Shinta Wakahisa via <vnh84=[email protected]> wrote:


No 3D printer.? About $4 at the local box store, heat gun, fits 4-inch hose.? Ugly, but functional.? The 3D print stuffs look quite nice!??


Re: 3D printer usage for wood shop

 

开云体育

Scanning a part versus designing?? I have a ton of first gen Bessey K-body clamps. Some had the black plastic support clips on the end and others didn’t drilled holes for clips maybe 30 clamps only to find that Bessey no longer sells them.? I was even able to reach the US importer and a guy when and looked at their old stock of parts to see if they had any.

?

Perfect 3D print item.? I’d done some CAD design and I even designed replacement drawer detents for an old Husky tool chest but I am hopelessly slow.


Re: 3D printer usage for wood shop

 



No 3D printer.? About $4 at the local box store, heat gun, fits 4-inch hose.? Ugly, but functional.? The 3D print stuffs look quite nice!??


Re: Storage of sheet goods

 

开云体育

I don’t use a ton of plywood.? The most I’ve used was to build 18 ft of lowers for my saw station.? I do have lots of variety and partial sheets which I mostly use to make jigs and quick things around the home.? I have pretty much shifted to only buying BB in half sheet format.? For hardwood veneer ply I saw my own 1/8veneers and vacuum press to BB ply.? In the old shop I had about 12” of space between the cantilever rack and the wall and I had a lower shelf that could fit ?4 by 8 sheets on the long side, and a shelf about that could handle 2 ft by 8 ft laying on the long side.? The pain of that was I had to have like 9 ft open along the wall to get anything out.

?

The appeal of the casters was to have full sheets on one and shorts on the other.? I saw another where they had it fixed on a pivot at one end.? I’ve always stored vertically but always on the long side to try to minimize warp.? Maybe I’ll try a vertical rack next to the dust collector.? How much space width wise before you would add a divider?

?

?

?

?

From: [email protected] <[email protected]> On Behalf Of bacchus6015 via groups.io
Sent: Wednesday, October 28, 2020 10:58 AM
To: [email protected]
Subject: Re: [FOG] Storage of sheet goods

?

Joe,

?

after I sold the cart like you posted I did what Jason has done and used drywall carts to move and store plywood for projects then put the leftovers on the cantilever rack.?

?

Like Imran said the cart you posted can be hard to move when loaded parts because it is so big it requires too much space as you need to be able to access it from all sides and I remember having several sheets of plywood on it and having a difficult time because the it wanted roll when trying to get sheets from the inside. ?

?

Using that cart really was an exercise in frustration.

?

Joe not in NO

?

?



On Oct 28, 2020, at 7:00 AM, Jason Holtz <jholtzy@...> wrote:

?

We have a drywall cart that has a UMHW?base on it, holds 10-15 sheets depending on thickness. It has really nice 5" casters on it, all 4 swivel but 2 have the option to lock straight although we never do. It rolls perfectly across our asphalt driveway, even when covered in walnut tree debris. If sheets are going to be used in short order they just stay on the cart. If storage is needed for a bit longer, I can just unload it straight into the vertical rack. I just slide the sheet off one end, tilt it up on a corner and slide it standing up into the rack. When it's time to use it, slide it out of the rack and tilt it down right onto the saw. The only time I ever lift a sheet is when it's coming off the delivery truck and two of us do that so it's easy.

We also have the Hafele Adapta Cart (tilting one) It's okay, but not nearly as nice for moving stuff around as the other. It's big and clumsy in comparison and the wheels aren't as smooth.


Jason Holtz
J. Holtz Furniture

3307 Snelling Ave. South

Minneapolis, MN 55406
612 432-2765


--
Jason
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406

?


Re: 3D printer usage for wood shop

 

开云体育

Mark,

i remember what was posted to be on the expensive side, from my point of view. i could be remembering the item incorrectly though.

imran

On Oct 28, 2020, at 6:01 PM, Mark Kessler <mkessler10@...> wrote:

?Imran, I printed this on a Markforged the material is nylon with chopped carbon fiber, i will check cost tomorrow but I don’t think it was $20.

<image.jpg>


Regards, Mark


4 new 410mm/16” Centrostar jointer/planer blades available cheap

 

I just went to install a new set of blades on my AD741 jointer/planer and 4 of the 6 blades shipped to me are the wrong part number. ?I am going to call Oella Saw and Tool but I bought them 2 years ago so I doubt a swap will be possible. ?They appear to be for?Wigo / Laguna AT970410W According to their web site. ?Anyone need these?

On the actual package
part number 114777, HSS 410mm, 18%/T1, system Centrostar
also has number FAO170213


Re: 3D printer usage for wood shop

 

Mark, is that a 4" hose? Can you print me one?

Bill Bélanger


On Wed, Oct 28, 2020 at 3:01 PM Mark Kessler <mkessler10@...> wrote:
Imran, I printed this on a Markforged the material is nylon with chopped carbon fiber, i will check cost tomorrow but I don’t think it was $20.



Regards, Mark


Re: Storage of sheet goods

 

开云体育

Here is my former plywood rack. I used both sides for whole sheets and the center for smaller scraps. It took a lot of floor space and was annoying to get to something not on top of the pile. I gave it away on Craigslist. I am a hobbyist, so I pretty much only buy what I need for a project, so most of my storage is scraps which fit under my CNC router.

?

A picture containing indoor, table, sitting, room

Description automatically generated

?

?

From: "[email protected]" <[email protected]> on behalf of "imranindiana via groups.io" <imranindiana@...>
Reply-To: "[email protected]" <[email protected]>
Date: Wednesday, October 28, 2020 at 1:58 PM
To: "[email protected]" <[email protected]>
Subject: Re: [FOG] Storage of sheet goods

?

joe,

?

Joe not in NO brings a good point about access to both sides and refreshes memories. so i can add a few things:

?

I can say that it was never something that i was pleased with. the purpose of casters for me was never to move it to a machine, rather necessary for me to get it out of the way. nothing i stored on it was too heavy - don’t recall storing full sheets.

?

after having it, i believe, for shorts, best is to find a wasted space and stick it in there. i have a 4’x4’ stair landing ~3’ above floor accessible from one side and i may convert that into a matrix of cubbies for shorts. otherwise bins for vertical storage.

?

for ply cutoffs the cart is just a vertical storage with a leaning wall. can be easily duplicated in a fixed location.

?

just my $0.02.

?

imran


On Oct 28, 2020, at 1:58 PM, bacchus6015 via groups.io <joeinno@...> wrote:

?Joe,

?

after I sold the cart like you posted I did what Jason has done and used drywall carts to move and store plywood for projects then put the leftovers on the cantilever rack.?

?

Like Imran said the cart you posted can be hard to move when loaded parts because it is so big it requires too much space as you need to be able to access it from all sides and I remember having several sheets of plywood on it and having a difficult time because the it wanted roll when trying to get sheets from the inside. ?

?

Using that cart really was an exercise in frustration.

?

Joe not in NO

?

?



On Oct 28, 2020, at 7:00 AM, Jason Holtz <jholtzy@...> wrote:

?

We have a drywall cart that has a UMHW?base on it, holds 10-15 sheets depending on thickness. It has really nice 5" casters on it, all 4 swivel but 2 have the option to lock straight although we never do. It rolls perfectly across our asphalt driveway, even when covered in walnut tree debris. If sheets are going to be used in short order they just stay on the cart. If storage is needed for a bit longer, I can just unload it straight into the vertical rack. I just slide the sheet off one end, tilt it up on a corner and slide it standing up into the rack. When it's time to use it, slide it out of the rack and tilt it down right onto the saw. The only time I ever lift a sheet is when it's coming off the delivery truck and two of us do that so it's easy.

We also have the Hafele Adapta Cart (tilting one) It's okay, but not nearly as nice for moving stuff around as the other. It's big and clumsy in comparison and the wheels aren't as smooth.


Jason Holtz
J. Holtz Furniture

3307 Snelling Ave. South

Minneapolis, MN 55406
612 432-2765


--
Jason
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406

?


Re: Chicago School of Woodworking

 

开云体育

And it has shipped. ?It will arrive on Halloween!


On Oct 26, 2020, at 5:10 PM, habacomike via <habacomike@...> wrote:

Shaun just emailed me that he is packing and shipping my item.?

Mike King
NERA Economic Consulting
+1 303 618-4915

On Oct 26, 2020, at 2:56 PM, Brian Lamb <blamb11@...> wrote:

?Well, I went and did some digging, I advise you to contact Shaun direct, according to their website, you can reach her at shaun@...?or they have a phone number listed that is 773-275-1170.?

Brian Lamb
blamb11@...





On Oct 26, 2020, at 1:43 PM, habacomike via <habacomike@...> wrote:

I got a request for payment, which I’ve provided, but have yet to see anything arrive at my doorstep. ?Or a shipping confirmation either.

On Oct 26, 2020, at 11:18 AM, Robert Johnson <woodewe@...> wrote:

Has anyone received an answer to their interest in the items for sale?

My inquiries have gone unanswered.

Thanks,

Bob




Re: 3D printer usage for wood shop

 

开云体育

Imran, I printed this on a Markforged the material is nylon with chopped carbon fiber, i will check cost tomorrow but I don’t think it was $20.



Regards, Mark


Re: 3D printer usage for wood shop

 

开云体育

I have been 3D printing for quite a few years now. I use it to help design prototypes and make a lot of fixtures. I need to hold things for laser engraving and have made a lot of jigs to hold parts at whatever angle and position I need. Just recently actually printed a set of vise jaws to hold an odd shaped part on the mill for a secondary operation on a 3D printed part, worked out well.

As for cost, you can figure roughly $20 a roll for good PLA, that’s a 1kg roll, and your slicing software will tell you how many grams of plastic it will take to print. Electricity to print is something in the range of $1 to $2 a day, depending upon how hot you run your bed and nozzle temps.

Brian Lamb
blamb11@...
www.lambtoolworks.com




On Oct 28, 2020, at 1:08 PM, michael@... wrote:

I have been thinking of getting a 3D printer for many years. I finally took the plunge about a week ago. Where ever I look I now see opportunities for 3D printed objects. There are also plenty of business opportunities, although I won't look into these before I've learned much more. Thought I might inspire some people here who are thinking about getting one. The coolest thing to me is that the things I create can be tailored exactly for my needs.

I have queued a bunch of print jobs with sandpaper holders to the printer. Soon I'll have complete order in my sand paper piles. The measurements for these boxes are made to exactly match my Systainer drawers. 3D printing takes very long time, these boxes prints in about 7 hours each. But the important thing is that they'll print completely unattended. I print at night and prepare the printer for the next job in the morning.

<Screenshot 2020-10-28 at 20.57.01.png>


Re: 3D printer usage for wood shop

 

I think the dust port adapter was printed in nylon. Nylon is about twice the price compared to PLA, which I used. Strength wise I don't think the adapter needed to be printed in nylon.

The diamond pattern was needed in order to both loose weight and to be sturdy. By using 30 degree angles I could minimize the overhang at the top of each diamond. 3D printers print layer by layer, so it's hard to print in mid air. Overhang up to approx 45 degree is ok.

I learned this lesson while trying to print the below model. The round holes makes the overhang completely unsupported and the print didn't go very well.