开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Felderownersgroup
  2. Messages
Expanded Topics Messages Polls
Date
Re: Job hiring #poll-notice

 

Looks like spam/scam.? Should be moderated or blocked?
Re: Shortening a bandsaw blade

Mike D.
 

Update:
Starrett Customer Service came through on this… the official line is that they don’t repair blades, but given the cost of the blade and that it’s a one-off ‘mulligan’,?they’ll have me ship?it back to the factory, to a specific person. My guess is somebody called in a favor.

Loud shoutout to Starrett.

Mike D.




On Wednesday, June 28, 2023, 06:37, Mike D. via groups.io <mjcdorsam@...> wrote:

Recently, I purchased a carbide-tipped bandsaw blade from Starrett, but?mis-read the description - leading to a 13’ 4” blade for my 13’ N4400. A rather expensive senior-moment without reading glasses.

Starrett won’t exchange the blade, and the current sense is they no longer provide repair services - Customer Service is looking into this.

Any help is appreciated.
Thanks.
Mike D.




--
Mike D.
Annapolis, MD
AD951; K700S; N4400

--
Mike D.
Annapolis, MD
AD951; K700S; N4400
Re: Troubleshooting Problems with Felder Machines

 

It could be more generic, however it’s a good place to start.

You would be amazed the number of customers who haven’t read the manual and their problems are as follows

- emergency stop button depressed

- cover, hood or door interlock switch issue because they’re trying to start a machine with an interlock active

- no power applied to the machine due to an installation error

As I always say during training courses, “ read the manual”

Many users don’t have the troubleshooting skills that many FOG members have.

Regards, Rod
Re: rip blade

 

Felder obviously, you need to supply address, name and phone number.

I often buy FS Tools blades, made in North America.

Regards, Rod
Job hiring #poll-notice

Group Notification
 

ROCHE COMPANY HIRING
Data operator is needed as a member of staff to be employed to enter or update data on a computer/laptop or on your phone, %100 strictly online work from home job and its flexible hours of work pay of $30/hr, payment is weekly or bi-weekly.. Send an email if interested to.
?
rochehirenicho (at) gmail.com

Results

See Who Responded

Re: rip blade

 

Another vote here for Ridge Carbide.? I recently bought two blades from them, good service, no issues.? They emailed me just to confirm that I really wanted Felder 30mm arbor with pin holes, and shipped the blades out within a few days.?

?

I also got a Forrest dado king from Sliver’s Mill.? Again, decent service, no issues, shipped fairly quickly.?

?

Each purchase was through their web pages, but each site lists a phone number, & presumably you could call in an order.? I called Ridge with some questions before purchase, they were very helpful.

I agree, the internet is the wild west, no telling where your info ends up. . .
Shortening a bandsaw blade

Mike D.
 

Recently, I purchased a carbide-tipped bandsaw blade from Starrett, but?mis-read the description - leading to a 13’ 4” blade for my 13’ N4400. A rather expensive senior-moment without reading glasses.

Starrett won’t exchange the blade, and the current sense is they no longer provide repair services - Customer Service is looking into this.

Any help is appreciated.
Thanks.
Mike D.




--
Mike D.
Annapolis, MD
AD951; K700S; N4400
Re: P coupling Felder adapter to Hammer

 

Hi Nathan,

Over a year ago I was also playing with that idea and whipped up a quick prototype as can be seen in the picture below. It is/was the goal to make some 3d printed parts and use the VEIKO T ruler () To date, I didn't spent the time to get the design forward. Currently I am just using a stop block that I fix with an F-clamp. I fixed it on the top T-slot as I have my doubts about the strength of the side mounted T-slot when it comes to being loaded with a 60-70 cm plywood panel. Does anybody have experience with load capabilities of the side of the sliding table on a Hammer?



Regards
Bram
Re: rip blade

 

I have ridge carbide blades and have been very happy with the blades as well as the customer service.

I would suggest ridge carbide. I also had good luck with forest.

On Tue, Jun 27, 2023, 10:37 PM Brandon Nickel <brandon.nickel@...> wrote:
I third the vote for Quinn Saw. They're local to me in St Louis. I've been there many times. They repaired a Forrest blade that ate my SawStop and it was flawless. They make quality blades to any spec you want for a reasonable price.?

Re: rip blade

 

I third the vote for Quinn Saw. They're local to me in St Louis. I've been there many times. They repaired a Forrest blade that ate my SawStop and it was flawless. They make quality blades to any spec you want for a reasonable price.?
Re: rip blade

 

I second Quinn Saw, we have a rip blade they made. Also Forrest is very good to deal with.

Jason Holtz
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406
612.432.2765

--
Jason
J. Holtz Furniture
3307 Snelling Ave. South
Minneapolis, MN 55406
P coupling Felder adapter to Hammer

 

Hi everyone.

I have an opportunity to procure a felder parallel cut guide that is designed for its P coupling system for felder saws. I currently own a hammer C3 31. Has anyone come across an adapter or suitable mounting method that could make this a worthwhile purchase?

the parallel cut guide is the same as here - ?

Thanks,
Nathan
Re: rip blade

 

开云体育

And Mac…the one that gets me is the “convenience fee”! ?I run from that one!

Wade

On Jun 27, 2023, at 4:12 PM, mac campshure via groups.io <mac512002@...> wrote:

?Hi Mike,?
I deal with a lot of vendors and there is no standard protocol.
Amazon click, yes?
eBay click yes
Some vendors require special arrangements and they all veri and have specific requirements .?
And yes some times to get what I want I have to give my SS witch really pisses me off.?
Typically their origin is parent coEuropean.?
Another one that is very annoying is charging a sur charge for using debit or credit card.
My most dislike vendor is USPS they are thives in my opinion.
mac,,,


martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330?cell

Designing and building for 50 years


On Jun 27, 2023, at 5:15 PM, John WI <jnadank@...> wrote:

?Quinn Saw and Tool has been great to deal with



On Jun 27, 2023, at 3:51 PM, Mike Leiferman <leiferman@...> wrote:

?Told Wade,
Will give them a call.
Mike


On Jun 27, 2023, at 3:38 PM, Wade Dees <wjdsignature@...> wrote:

?
Mike,

This is who I use for my blade needs. ?And you don’t need to give them all your personal info. ?


Thx,

Wade





On Jun 27, 2023, at 1:33 PM, Mike Leiferman <leiferman@...> wrote:

?
I'd like to buy a 28 tooth 300 mm od 30mm bore std kerf quality rip blade for my slider that is not made in china from a company that will send it to me if I give them my credit card over the phone.? ?Suggestions?

I tried Lietz and they want my SS number in order to set me up in their system, which in this day and age seems a lot to ask from a customer.

The last Tennyru I got had Made In China on it, and I really try to avoid that.?

Thanks,
Mike

Re: Troubleshooting Problems with Felder Machines

 

开云体育

Imran,

Where in the heck did you get your precision concave edge, I’ve been looking forever!

????

Wade



On Jun 27, 2023, at 4:23 PM, imranindiana <imranindiana@...> wrote:

?“OMG! I never thought I would find a use for my precision concave edge, thank you Felder. You are the best ?”

Imran Malik

On Jun 27, 2023, at 2:19 PM, bacchus6015 via groups.io <joeinno@...> wrote:

?"Who wouldn’t want a spring joint every time?"

Joe

On Jun 27, 2023, at 11:16 AM, Mark Foster <mfsta2lt@...> wrote:

“ We can have it delivered tomorrow “.

Mark Foster


On Jun 27, 2023, at 11:04, David P. Best <dbestworkshop@...> wrote:

?I got this in the email stream this morning and couldn’t help myself.

Caption this contest. ?Here’s my entry.

“Tell me again why this jointed surface ends up concave?”

<Caption This.jpeg>


David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best


Re: Troubleshooting Problems with Felder Machines

 

开云体育

“OMG! I never thought I would find a use for my precision concave edge, thank you Felder. You are the best ?”

Imran Malik

On Jun 27, 2023, at 2:19 PM, bacchus6015 via groups.io <joeinno@...> wrote:

?"Who wouldn’t want a spring joint every time?"

Joe

On Jun 27, 2023, at 11:16 AM, Mark Foster <mfsta2lt@...> wrote:

“ We can have it delivered tomorrow “.

Mark Foster


On Jun 27, 2023, at 11:04, David P. Best <dbestworkshop@...> wrote:

?I got this in the email stream this morning and couldn’t help myself.

Caption this contest. ?Here’s my entry.

“Tell me again why this jointed surface ends up concave?”

<Caption This.jpeg>


David Best
DBestWorkshop@...
https://www.flickr.com/photos/davidpbest/collections/
https://www.youtube.com/@David_Best


Re: rip blade

 

开云体育

Hi Mike,?
I deal with a lot of vendors and there is no standard protocol.
Amazon click, yes?
eBay click yes
Some vendors require special arrangements and they all veri and have specific requirements .?
And yes some times to get what I want I have to give my SS witch really pisses me off.?
Typically their origin is parent coEuropean.?
Another one that is very annoying is charging a sur charge for using debit or credit card.
My most dislike vendor is USPS they are thives in my opinion.
mac,,,


martin/campshure/co/llc
mac campshure
7412 elmwood ave.
middleton, wi 53562-3106
608-332-2330?cell

Designing and building for 50 years


On Jun 27, 2023, at 5:15 PM, John WI <jnadank@...> wrote:

?Quinn Saw and Tool has been great to deal with



On Jun 27, 2023, at 3:51 PM, Mike Leiferman <leiferman@...> wrote:

?Told Wade,
Will give them a call.
Mike


On Jun 27, 2023, at 3:38 PM, Wade Dees <wjdsignature@...> wrote:

?
Mike,

This is who I use for my blade needs. ?And you don’t need to give them all your personal info. ?


Thx,

Wade





On Jun 27, 2023, at 1:33 PM, Mike Leiferman <leiferman@...> wrote:

?
I'd like to buy a 28 tooth 300 mm od 30mm bore std kerf quality rip blade for my slider that is not made in china from a company that will send it to me if I give them my credit card over the phone.? ?Suggestions?

I tried Lietz and they want my SS number in order to set me up in their system, which in this day and age seems a lot to ask from a customer.

The last Tennyru I got had Made In China on it, and I really try to avoid that.?

Thanks,
Mike

Re: rip blade

 

开云体育

Quinn Saw and Tool has been great to deal with



On Jun 27, 2023, at 3:51 PM, Mike Leiferman <leiferman@...> wrote:

?Told Wade,
Will give them a call.
Mike


On Jun 27, 2023, at 3:38 PM, Wade Dees <wjdsignature@...> wrote:

?
Mike,

This is who I use for my blade needs. ?And you don’t need to give them all your personal info. ?


Thx,

Wade





On Jun 27, 2023, at 1:33 PM, Mike Leiferman <leiferman@...> wrote:

?
I'd like to buy a 28 tooth 300 mm od 30mm bore std kerf quality rip blade for my slider that is not made in china from a company that will send it to me if I give them my credit card over the phone.? ?Suggestions?

I tried Lietz and they want my SS number in order to set me up in their system, which in this day and age seems a lot to ask from a customer.

The last Tennyru I got had Made In China on it, and I really try to avoid that.?

Thanks,
Mike

Re: rip blade

 

I have a couple of Tenryu blades - I am not very happy with my rip blade. I think the tolerances are poor.

I have an Amana that seems pretty good, although I did have a local shop retried it to a flat top profile.
--
John Hinman
Boise ID
K700S and A941

Re: rip blade

 

Hi Mike
There may be better options for getting good blades from known reputable suppliers, however....
One way to deal with overseas or suspect suppliers is (if you are prepared to risk the total amount of the? transaction is) to use a debit card on an account that only has that amount of money in it.??
Cheers
David

Re: rip blade

 

开云体育

Told Wade,
Will give them a call.
Mike


On Jun 27, 2023, at 3:38 PM, Wade Dees <wjdsignature@...> wrote:

?
Mike,

This is who I use for my blade needs. ?And you don’t need to give them all your personal info. ?


Thx,

Wade





On Jun 27, 2023, at 1:33 PM, Mike Leiferman <leiferman@...> wrote:

?
I'd like to buy a 28 tooth 300 mm od 30mm bore std kerf quality rip blade for my slider that is not made in china from a company that will send it to me if I give them my credit card over the phone.? ?Suggestions?

I tried Lietz and they want my SS number in order to set me up in their system, which in this day and age seems a lot to ask from a customer.

The last Tennyru I got had Made In China on it, and I really try to avoid that.?

Thanks,
Mike

10141 - 10160 of 141159