Keyboard Shortcuts
Likes
- Felderownersgroup
- Messages
Search
Re: KF700sp and AD741 used pricing
开云体育Mike, Did you intend to include a link or pics? Have the machines been in hobby use or commercial? Hard to say without condition and other details. Shaper tooling can easily add $$$. Imran On Jan 4, 2021, at 1:07 PM, Mike Barrow via groups.io <lunatuna23@...> wrote:
?Hoping you guys could help me understand if this used Jointer planer and Saw/Shaper is a good deal at $7,500 for the J/P and $12,500 for the 8.5' KF700SP. ?They come in what appears to be excellent condition, extension tables, some shaper tooling and the KF700 has digi-drive and variable motor speed with separate saw motors for main saw blade and scoring blade. Seems like it might be a little on the high side for 14+ year old equipment, but.... Please let me know what you think. Thanks! -- Mike Barrow |
Re: KF700sp and AD741 used pricing
My new KF700SP with a 10' slider cost somewhere in the $23,000 range, withe the following basic specs:
-- 7.5hp 3 phase package -- Separate scoring motor -- 3200mm slider -- 1250mm rip with micro adjust? -- All-mechanical adjustments (no power/digi-drive) -- 1500 outrigger -- Regular outrigger fence -- Smaller miter fence -- Parallel guide for X-Roll fence -- Aigner fences for shaper -- 1-1/4" and high speed router spindles Ordered mid-2020, expecting delivery sometime in January. Hope this helps!? -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN |
KF700sp and AD741 used pricing
Hoping you guys could help me understand if this used Jointer planer and Saw/Shaper is a good deal at $7,500 for the J/P and $12,500 for the 8.5' KF700SP. ?They come in what appears to be excellent condition, extension tables, some shaper tooling and the KF700 has digi-drive and variable motor speed with separate saw motors for main saw blade and scoring blade.
Seems like it might be a little on the high side for 14+ year old equipment, but.... Please let me know what you think. Thanks! -- Mike Barrow |
Re: CNC (or at lest programmable) shaper setup adivce?
Why do you want a large sliding table for the oversized door?? Martin makes the best sliding table, and they do not put it on their shaper, this tells you something. Check the following youtube video. Also, the flagship Format 4 profil 92 emotion from Felder does not have the sliding table either. James On Mon, Jan 4, 2021 at 11:15 AM Brett Wissel <Brettwissel@...> wrote:
|
Re: Cetol Door & Window now PPG Proluxe
开云体育There is no mention of sanding between coats in the application instructions. Any recommendations? I am applying it to western red cedar. Imran On Jan 3, 2021, at 2:29 PM, imranindiana via groups.io <imranindiana@...> wrote:
? I am applying it in shop . First time used the niosh ov/sd/hc/cl filters on my mask. These are ~15 yrs old. Did not smell a thing until i took them off before leaving the shop, so I guess they work. I could smell my jacket once in the house, so put that in the garage. Shop is at 60 due to this job, hopefully, I can apply 2nd coat tonight or tomorrow. I will prepare more parts. Had I known it will go so quick, I would have prepared everything. Imran Imran On Jan 3, 2021, at 2:06 PM, Shawn Kammerer via groups.io <shawnkammerer@...> wrote: ?
It’s great stuff. The first coat dries in a reasonable amount of time, depending on your weather conditions, but subsequent coats take forever to dry if you do full coats in cold temperatures, so plan accordingly. I’ve wiped it on in thin coats before, if it’s cold. If you do, it takes a lot more coats, but you have less bugs doing belly flops in it at least. A nice heavy coat that stays wet for a day?is really inviting for anything that happens to fly by.?
-Shawn
On Sunday, January 3, 2021, 10:55 AM, imranindiana via groups.io <imranindiana@...> wrote:
|
Re: CF-531 won’t start after replacing selector switch
开云体育That switch may have come with jumpers installed to make it look like the original electrically.? Without a wiring diagram for the original it will be difficult to determine with a multimeter as that switch is presumed defective.? At this point I would contact Felder to see if the switch came ready to install or if the jumpers should have been moved to match the original. ? From: [email protected] <[email protected]>
On Behalf Of Justa318@...
Sent: Friday, January 1, 2021 7:30 PM To: [email protected] Subject: Re: [FOG] CF-531 won’t start after replacing selector switch ? Thanks, Joe and Imran I bought the new switch from Felder. It was specified after their technician did his on-site troubleshooting to determine that it was, in fact, the switch causing the original problem with my machine.? ?So, I can only assume they knew what old switch it was replacing.? At the time, I had asked for a wiring schematic, but they didn’t send anything. ? As mentioned, the new switch came with jumpers installed between terminals, but I removed all of these and replaced them with jumpers to match the connections on the old switch.? I suspect, as Joe mentioned, that some of the jumpers that came with the new switch were there to replicate the switching function of the old switch.? I wish I had taken a photo of the jumper configuration on the new switch before taking them all off.? I also saw reference to the A11 switch in the Kraus & Naimer catalog that Imran found, but couldn’t find the specific model matching the new switch, nor could I find any reference to the old A14 switch.? I hope to talk with Felder on Monday and get a wiring schematic for the new switch (and old switch, if different).? I will also reach out to Kraus & Naimer to see if they can help me with the switching configuration of the two switches.? Of course, it’s possible that I somehow didn’t wire the new switch up exactly the same as the old one, but I was pretty careful – doing one terminal at a time.? Thanks again for your help and suggestions.? Will keep you posted.? Todd |
CNC (or at lest programmable) shaper setup adivce?
All,? I am considering the cost/value proposition of investing in a shaper setup that has automated programmable?setup capacities (or more?). I am curious what your recommendations may be for shopping brands, models,? and options. I'm becoming less convinced that a used machine will show up on the market as I've been looking for a while and what I've seen has pretty much only been Joe in N.O.'s Profile45, but admittedly I was looking for a larger sliding table to run oversized door setups, and I'm not totally convinced the Felder offerings are the only ones I should be looking at.? Currently I'm invested in the 700z-class of shaper and not sure I'd want to give them up. I'd even consider putting on an upgraded fence module that can give me the automatic adjustments, but not sure if it is possible or if I can do it feasibly compared to adding another machine.? With tedious manual setup inefficiencies switching back and forth on small projects I'm assessing the opportunity cost of all those nickels and dimes per se. Brett Wissel Saint Louis Restoration 1831 S Kingshighway Blvd (at Shaw Blvd) St Louis, MO 63110 314.772.2167 brett@... |
Re: Self Retracting Air & electric Reels?
开云体育Mine is about 14 years old and I did have to put a new o-ring in the rotary union a couple years back…. which would have been simple if it wasn’t 16 foot off the ground.
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
Martin slider is indeed phenomenal. The build quality is absolutely the best in the world. The parallelogram outrigger table is so nice and easy to use. James?
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
开云体育That slamming is not for the faint of heart. I had to up my game several times and even made a phone call to felder to confirm the level of slamming ? Imran? On Jan 3, 2021, at 10:41 PM, david@... via groups.io <david@...> wrote:
?He’s forcing the bearing cage to center between the upper and lower sliding table ways. ?You have to do the same thing on a Felder X-Roll to get the bearing cage centered. ? You’d never know that unless you remove the sliding table component from the lower rail. ?No difference here. ?Where there is a big difference is the lower sliding table rail. ?The Martin lower carriage is a welded steel component filled with concrete and does not flex. ?The Felder lower carriage is a flexible aluminum extrusion which is what creates all the adjustment madness. ?It’s less expensive, and reduces the weight distribution demands on the main chassis (tipping and flexing) but needs meticulous adjustments at multiple points which we’ve hashed over here on FOG continuously. ?The rigid lower carriage on the Martin eliminates all the banana-shaped issues and does not flex as the top sliding table is moved fore/aft. ?But it comes at a price. David Best https://www.instagram.com/davidpbest/
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
toggle quoted message
Show quoted text
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
James, They released a version of the video with English subtitles. I watched it at one point.? On Sun, Jan 3, 2021 at 10:32 PM James Zhu <james.zhu2@...> wrote:
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
开云体育He’s forcing the bearing cage to center between the upper and lower sliding table ways. ?You have to do the same thing on a Felder X-Roll to get the bearing cage centered. ? You’d never know that unless you remove the sliding table component from the lower rail. ?No difference here. ?Where there is a big difference is the lower sliding table rail. ?The Martin lower carriage is a welded steel component filled with concrete and does not flex. ?The Felder lower carriage is a flexible aluminum extrusion which is what creates all the adjustment madness. ?It’s less expensive, and reduces the weight distribution demands on the main chassis (tipping and flexing) but needs meticulous adjustments at multiple points which we’ve hashed over here on FOG continuously. ?The rigid lower carriage on the Martin eliminates all the banana-shaped issues and does not flex as the top sliding table is moved fore/aft. ?But it comes at a price.David Best https://www.instagram.com/davidpbest/
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
Martin factory tour. Wish there was at least english translation. I am a bit surprised?that when installing the sliding table, the young guy slammed the sliding table multiple times. James
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
开云体育Ask Martin for quotes. ?Like Felder gear, it varies a lot depending on what options you configure with the machine.David Best https://www.instagram.com/davidpbest/
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
开云体育What’s price for Martin ?Elegance Custom Cabinetry? Minneapolis, Minnesota? Dmitry Ivanovs . On Jan 3, 2021, at 21:06, david@... via groups.io <david@...> wrote:
|
Re: Kappa 400 Below Table Dust Extraction + Kappa 400 Review
开云体育Bomb-proof is how I describe them. ?Much better build quality than a 590 - in my humble opinion. ?Sorry Felder.David Best https://www.instagram.com/davidpbest/
|