James,
The manual is showing the backside washers as being called ball socket 1 & 2. ?See picture, circled in red. ?No signs of the larger diameter washers being used. ?
The ball socket like washers have corresponding concave faces that fit into one another. ?Not sure why they have this shape to them. ?
Wade
toggle quoted message
Show quoted text
On Jun 30, 2023, at 8:49 PM, James Zhu <james.zhu2@...> wrote:
?
Wade,
larger?washers are used on the backside of the casting. If my memory?serves me correctly, it is a washer (not a split washer) like the one in your picture sitting between the casting and the nut.?
James
James,
Thank you for your help.? In that first picture, is that a split washer sitting between the casting and the nut?? And it looks like you did use the larger washers in the second picture on the backside of the casting.
Thx,
Wade
?
Wade,
I have AD741, I believe the support bar is the same as AD941's. The description on the manual is correct, it is sort of German English :)
James
Hello FOG members,
Could someone with an AD941 chime in on the proper assembly order for the support bar hardware.? Felder shows one thing in the manual, but then supplies the bar with these ¡°spacers¡± that came already on the threaded rod.? Not sure if I remove these spacers or use them.? You can see them circled in red.? And, according to the manual, it appears that I don¡¯t use the large washers at all.? Maybe these were for shipping purposes only.?
Thank You,
Wade
