Hi Imran
? ? ? It is 230v single phase, I do not know how to tell if the electric brake is working.
If I disengage the infeed drive , the motor will work just sometimes, but if I remove the drive belt from the pulley the motor works every time
Keith
toggle quoted message
Show quoted text
Keith,
Not sure what is happening but few pieces of info may help. Single phase or 3 phase? Is electric brake working, load or no load?
Imran
On Mar 14, 2021, at 6:40 AM, keithturner01@... wrote:
?My planer /jointer has just developed a problem.
When I start the machine up the head starts to turn then stalls and starts a growling noise (for want of a better word) ,the motor overheats and cuts out.
I have taken the drive belt off and the motor works fine, I checked the head and it seems fine, bearings turn freely and no play. When I reinstall the drive belt stalls again. i.e motor do not seem to work under load, Any ideas Keith
