I think 3¡±on center line , I would use torx 25?
Chrome plated.
Mac,,,
Designing and building for 47 years
toggle quoted message
Show quoted text
On Feb 25, 2020, at 4:58 PM, Ron Magliocco <rmagliocco2@...> wrote:
?
My tried and true method is to cut my edge banding about 1/2¡± thick and use drywall screws spaced about 6¡± to hold it in place. Cover the screw heads with wood filler. Never fails.?
Ron Magliocco
1-203-216-4629
On Feb 25, 2020, at 2:55 PM, Bill B¨¦langer <Bllblngr@...> wrote:
?I've always done edge banding with the iron on strips. Now that I have a shaper, I'd like to actually use hardwood edging. I retrospect, I could have used my router table too. I'm thinking I'd like the V edges, instead of a tongue and groove, although I do have the set of Rangate groovers. I'd like a recommendation for a good cutter set with the 1 1/4 bore. I'd call Rangate, but thought I'd check with y'all first. I'm not in a rush to get the job done, and I'm not in production, so what's my best bet?
Thanks in advance
Bill B¨¦langer
