开云体育

Very good, will keep an eye out. I have writte a few cookbook type guides for other ham equipment and siftware, will give some thought to finding something I couls offer here. Really like my VA5. My

Hello Wes, Thanks for the suggestion. I had a look and it seems to have all we need. I'll make a start soon. 73 Dieter, VK3FFB

With regard to guide documents, the Wiki folder on this web site is actually designed for just this purpose. Might be the way to go. -- VY 73, Wes AE6ZM

Best wishes for 2022 to all group members. I am pleased to announce that we now have 166 group members. While the group activity remains relatively low, all question from FA-VA5 users are answered

Just dawned on me that this may be related to the actual device display rather than the software display. Right ?? Have to admit that I have never used the device display. Need to expand my horizons

Ok, now I understand and would automatically assume + to the right. However, that brings another question - why or when would such a scale be appropriate or useful. I would think a linear frequency

Hello Mike The question was related to the frequency axis of a VSWR graph on the FA-VA5. If we have a "delta-f axis" with the sweep defined as fc +/- delta-f then the axis shows negative delta-f

Sorry but just gotta ask - what is + or - when related to Single sweep SWR ?? Never heard of a negative SWR. Mike / W8DN

Ken's question was answered by direct e-mails. Otherwise, pages 15-17 of the FA-VA5 manual are relevant. regards Dieter, VK3FFB

Under SWR Single sweep, based on this practically useless manual, how do you tell which side is plus (+) and which is minus (-)??? Thanks.....Ken

Thanks for the informations, I will dig into it. Val N4RJ

generally applicable video: https://youtu.be/1FdXifnWrLE if you permanently attach a 50 ohm load to the nanoVNA's second port (CH1, S21), then what you have is roughly equivalent to the FA-VA5.

Hello Val thanks for your message. So far, I have found out that it is indeed possible to make TDR measurements in conjunction with the DG8SAQ VNWA software. The best way to get you going is perhaps

As a start, since it seems the trouble you are having is with the VNWA software you might take a look over at the VNWA group on Groups.io. -- VY 73, Wes AE6ZM

Val, this group is alive, but not really active. Your request for a how-to cookbook for TDR measurements is a pretty large request. Like you, many of us have lots of time, but not so much energy. I

Am I too far gone for Help? Or, is anyone using this thread? Still lost in the Ozone down here. Thanks Val N4RJ

Dear FA-VA5 users, For those of you who may not be so familiar with antenna impedance measurements, here are some points to consider: * If a reasonably *well-matched antenna?is measured via a long

This is my first post. I am Old.? Licensed for 65 years so my "New Skill" learnin' ain't what it used to be. I have a FA-VA5. I want to use it to do TDR. I need a 1,2,3,4 Cookbook to set it up if

Hi, I have a FA-VA5 but don't know how to use it for TDR. I am not an EE and just plodding along with half a brain and a lot of Trial and Error. Can someone cook Book a 1,2,3,4,etc list of things to

Hi Magne The idea is not bad and it is in fact widely used in so-called filter synthesis. The only crux is that it works only with lossless networks (Q = infinity). When we have a lossy filter, we can