开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. Eurovanupdate
  2. Topics

Norcold Ignitor Fix #Norcold

 

The attached document is a complete set of instructions for identifying and repairing the Norcold gas ignitor issue that prevents the propane circuit from working.
This procedure is accomplished with readily available parts that are not too expensive and do not require replacement of the ignitor unit.
Please read through the entire document. It is recommended that you print it before statrting.?
If you find errors or want revisions, please contact me and I will make changes.?

Eurovan_Norcold_Refridgerator_Gas_Relighter_Fix_rev-5.pdf
Eurovan_Norcold_Refridgerator_Gas_Relighter_Fix_rev-5.pdf

 

This is amazing and very timely for me. I was really struggling with the flame not staying on just on my most recent trip. I love all of your posts and information, truly so useful and helpful! Thanks so much.
 

开云体育

A couple things people over look:
Make sure the vent tubes are ?clear, air gos in and out
Connections are tight and clean
That all thermocouple connection are fairly tight
Take pictures, notes and double check

On Aug 5, 2022, at 11:30 AM, Tom Kennedy <kennedy.tom@...> wrote:

?This is amazing and very timely for me. I was really struggling with the flame not staying on just on my most recent trip. I love all of your posts and information, truly so useful and helpful! Thanks so much.

 

Last year I pulled my Norcold out of my 1995 EVC to change out the burner. This link was provided on this list before, this is my write up and pictures of the job which I posted up on TheSamba.com.

Ben Buja
SF, CA

On 08/05/2022 10:17 AM Wigen via groups.io <chenely63@...> wrote:



A couple things people over look:
Make sure the vent tubes are ?clear, air gos in and out
Connections are tight and clean
That all thermocouple connection are fairly tight
Take pictures, notes and double check

 

Just to second the recommendation to clear the lines. I replaced the burner a year ago, all was well. This year had issues after storage, but once I shop vacuumed out the fluent it’s worked better than ever.
R

On Fri, Aug 5, 2022 at 4:13 PM Wigen via <chenely63=[email protected]> wrote:
A couple things people over look:
Make sure the vent tubes are ?clear, air gos in and out
Connections are tight and clean
That all thermocouple connection are fairly tight
Take pictures, notes and double check

On Aug 5, 2022, at 11:30 AM, Tom Kennedy <kennedy.tom@...> wrote:

?This is amazing and very timely for me. I was really struggling with the flame not staying on just on my most recent trip. I love all of your posts and information, truly so useful and helpful! Thanks so much.

 

To prevent bugs and wasps from entering any of the vents to your internal equipment, remove each vent and place stainless steel window screen across the hole through the body of the van and reapply the vent. No rust, heat-poof, and no more bugs invading your burner/furnace assemblies. Be sure to cover every vent.

1 - 6 of 6