|
May well have been covered but ¡..
?
what¡¯s the opinions here on adding a Dro and which one ?
?
I have a small proxxon which I added a Dro to the carriage and simply used a good Dti behind the cross slide as a when needed , It works well especially for the milling attachment side of things ¡
?
Probably something better and easier to use would be good for a bigger lathe :)
?
Ricky |
¿ªÔÆÌåÓýI added a 3-axis DRO many years ago and I could not imagine having to go back to the manual dials. In fact, the z-axis died on me so I ordered a replacement computer (I kept the original glass scales and just matched the model of the DRO) and literally just installed it on Saturday. The original install took a while with quite a few custom fabricated brackets, but it was absolutely worth it IMO. The model I got was the GCS900-3D. The original one I got from ebay, but the replacement one I got from Aliexpress (). They¡¯re cheap Chinese quality, but the computer lasted me for almost a decade and the scales are still perfect. ? Here¡¯s a blog with some Youtube videos I did way back when to document it. Hope this helps ?
? Chris Eastern Canada ? From: [email protected] <[email protected]>
On Behalf Of teamricky.m via groups.io
Sent: Wednesday, April 30, 2025 11:56 AM To: [email protected] Subject: [emcoV10lathe] Dro ? May well have been covered but ¡.. ? what¡¯s the opinions here on adding a Dro and which one ? ? I have a small proxxon which I added a Dro to the carriage and simply used a good Dti behind the cross slide as a when needed , It works well especially for the milling attachment side of things ¡ ? Probably something better and easier to use would be good for a bigger lathe :) ? Ricky |
terry keeley