Answer for cup wheels ,James i am not sure if you thinking cup wheels in this dimensions emco grinder use arbour but i can ask but again minimum order can be probably less like in this wheels but will probably more expensive i would say if i remember technician told me the minimum mount of grinding powder what they can mix it is 2,5 kg so depence how many they will able manufacture from it? , and yes wheels i offer are flat , my regards Roman
Hi James i can find more if you like just tell hwat you interesting for ,in this moment i know that mixture should be to 55 rockwell can be in brown or white collor this wheels are brand new company will make them for my order also dimensions but minimum order is 50 pieces ,company name is TYROLIT check up your self quality of they product , send me your specific question and i will contact technician in company and i will ask them for you no problem James ,
Hi Andrei i can have only one grid - 60 or 80 depence how many people choose one more .Always i have to ordrer minimum 50 grinding wheels in one type
of grit , M80 for general use recommendet this say manual for TPG
---------- P?vodní e-mail ----------
Od: Andrei via groups.io <calciu1@...>
Komu: [email protected] <[email protected]>
Datum: 16. 5. 2025 15:49:10
P?edmět: Re: [emcoV10lathe] TOOL POST GRINDER - NEW original grinding wheels for sale
Hi Roman. A set is both grits M60 and M80.?
But, I just wanted to mention that I don't need any. I just bought a nice grinder that uses much bigger wheels
Andrei two wholle sets you mean two wheels?
---------- P?vodní e-mail ----------
Od: Andrei via groups.io <calciu1@...>
Komu: [email protected] <[email protected]>
Datum: 16. 5. 2025 15:03:18
P?edmět: Re: [emcoV10lathe] TOOL POST GRINDER - NEW original grinding wheels for sale
At a price of 12 Euro (about 13 dollars), I would buy two whole sets. Who knows when such a buying opportunity will come again.
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces,
the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Hi Andrei i can have only one grid - 60 or 80 depence how many people choose one more .Always i have to ordrer minimum 50 grinding wheels in one type of grit , M80 for general use recommendet this say manual for TPG
Andrei two wholle sets you mean two wheels?
---------- P?vodní e-mail ----------
Od: Andrei via groups.io <calciu1@...>
Komu: [email protected] <[email protected]>
Datum: 16. 5. 2025 15:03:18
P?edmět: Re: [emcoV10lathe] TOOL POST GRINDER - NEW original grinding wheels for sale
At a price of 12 Euro (about 13 dollars), I would buy two whole sets. Who knows when such a buying opportunity will come again.
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces,
the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Andrei two wholle sets you mean two wheels?
---------- P?vodní e-mail ----------
Od: Andrei via groups.io <calciu1@...>
Komu: [email protected] <[email protected]>
Datum: 16. 5. 2025 15:03:18
P?edmět: Re: [emcoV10lathe] TOOL POST GRINDER - NEW original grinding wheels for sale
At a price of 12 Euro (about 13 dollars), I would buy two whole sets. Who knows when such a buying opportunity will come again.
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces,
the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces, the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune
time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces,
the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune
time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces,
the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: Milling head Maximat V10 first inspection: grease and oil
Regarding: "Any SAE 10 motor oil would work just fine, right?", the answer is NO.
?
Typical "motor oil" (for cars) includes detergents to suspend dirt & particles to be removed by a filter as the oil is pumped around.? I'm not sure about the geometry of the mill, but for lathes, you want any debris to settle into the bottom of the gear box.? It sounds like the V10 just uses grease, so that may not be an issue.
?
I have also heard there can be additives in some motor oils that don't play well with the bronze or zinc components used in some machine tools gear boxes.??
?
The safest bet is to use hydraulic oil, which doesn't contain much in the way of additives, beyond rust preventatives.? If it's just for exterior sliding surfaces (ways, column, quill), "way" oil is specifically designed for that.? Vactra #2 oil is the classic that has been around for at least 60 or 70 years.? It can be hard to find in small quantities, but large shops use it by the gallon.? You could probably talk them out of a cup worth in trade for a box of donuts.? There are also some vendors that cater to hobbyists that re-package it and sell it in small quantities.
?
The one caution about way oil is that it tends to stick, and then slip.? That's fine for things that are moved by lead screws & such.? I have a mill with a round ram, and when you try to rotate it to get it adjusted so the spindle is vertical, it is almost impossible to get it to move in small amounts if you use way oil.? Hydraulic oil works much better for that..??
?
Doug White
Re: TOOL POST GRINDER - NEW original grinding wheels for sale
Roman, I just wore out my original wheel and have been unsuccessful trying to find a replacement here in the states. Please place me on your list for 3 Wheels. Either M80 or M60 is ok for me. Your email comes at an opportune time, Clyde Jones
On Friday, May 16, 2025 at 04:41:33 AM EDT, roman fox via groups.io <romanfox68@...> wrote:
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces, the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: Milling head Maximat V10 first inspection: grease and oil
Hello all ,guys I have the opportunity to buy original size ,grinding wheels from the renowned company TYROLIT 65x6x16 mm ( grid M80, M60 depends on what we want, but only one type of grid for all wheels ), unfortunately the minimum quantity is 50 pieces, the price for one including taxes is 12 eu, I would like to ask if anyone is interested, and how many pieces you will require ?? Thank you all for quick answer ,my regards Roman
Re: Milling head Maximat V10 first inspection: grease and oil
As far as I remember, 4 speed mill takes no oil anywhere. For sliding surfaces like leadscrew and column you can use any oil, but way oil (usually ISO 68 thickness) should cling well and make as little mess as possible. I oil mine with ISO 32 hydraulic oil simply because that's what I have a lot of. It drips down into the chip tray over time so I reapply it more or less every time I use the mill (which is sadly not often).
I don't think your mill will care which oil you use as long as you use it. While no oil is beneficial for you, plain hydraulic oil will likely contain the least additives that might be harmful for you (or stinky). Using gloves near this kind of machine is generally frowned upon, so those factors might be considered when choosing the oil as well. That being said, you shouldn't be handling those surfaces directly anyway so it might be moot.
On Thu, May 15, 2025 at 6:43?PM esimonee via <esimonee=[email protected]> wrote:
Thanks for the reply Vedran.
I will re-check properly when I will remove the grease and clean the gear box. At the first inspection, everything looked intact and the gears moved freely.
?
Thanks for the explanation, I will do that!
?
Regarding the oil, is there something to take in consideration? Is there any oil to refill or check in the mill head?
Any SAE 10 motor oil would work just fine, right?
Re: Milling head Maximat V10 first inspection: grease and oil
I will re-check properly when I will remove the grease and clean the gear box. At the first inspection, everything looked intact and the gears moved freely.
?
Thanks for the explanation, I will do that!
?
Regarding the oil, is there something to take in consideration? Is there any oil to refill or check in the mill head?
Any SAE 10 motor oil would work just fine, right?
Re: Milling head Maximat V10 first inspection: grease and oil
If nothing is broken, the most logical explanation is that someone was in there before you and managed to drop the brass block in the process. It's pretty much impossible to remove the thing by shaking (or even force) when everything is in place.
NLGI 1 and 2 are not far apart. If you use the thicker one you'll lose a bit of power and make the mill heat up a bit more. But it doesn't have to be synthetic or mineral, and since you're removing the old stuff, you can put in whatever you like. Some grease bases don't like to mix, but if you stick to lithium base you should be fine either way.?
If you really want to clean the thing you can strategically wash out areas with a bit of kerosene, mineral spirits or similar solvent after you remove whatever you can of old grease. I'd be mindful not to flush out the grease from any bearings though, and especially not from the spindle, so don't drench the thing.
On Thu, May 15, 2025 at 2:27?PM esimonee via <esimonee=[email protected]> wrote:
Hello everybody,
?
I am new to the group.
I just got Maximat V10 milling column attached to a very heavy metal base connected to Sweden made xy table. So no lathe.
?
I have a no much experience in metal working, but nevertheless I like to start good and new. Recently I started to inspection the mashine, I opened the gear case and I found 2 things:?
1 - the small squared brass piece (used for transporting the gears up and down) was laying inside at the bottom of the case (see pic).
2 - part of the grease inside seemed to be old (see pics)
?
1 > At that point I put back the brass on the arm and everything worked just fine. Actually I was able to change the gear position even without the brass, even thou I think it wasn’t the best. Does anybody know why this actually happened? I can’t really understand how this little piece of brass could came out from its arm, because the position it has “locks” it against its spot on the gears post.?
One thing to say: the milling column has been transported and stored horizontally inside a wooden box. Might it fell down during this time?
?
2 > Regarding the grease, I was now thinking to remove as much as possible from the 2 lateral windows without disassembling everything, and filling in a new one. Now, I already read many threads regarding which grease to use. I wanted to stick to the NLGI 1 lithium-based one advice on the manual, but I actually can’t find fine one like this that is synthetic. The only SYNTHETIC and LITHIUM based I found is a NLGI 2. The NLGI 1 I found comes always as MINERAL and LITHIUM based. Can somebody recommend me a NGLI 1 synthetic and lithium-based? Or would the NLG1 mineral and lithium based work as well? Or is it crucial to actually put NGLI 1?? Would the NGLI 2 work as well?
?
3 > Regarding oil for the vertical leadscrew and vertical column, SAE 10 motor oil, correct?
?
Thanks in advance
Milling head Maximat V10 first inspection: grease and oil
I just got Maximat V10 milling column attached to a very heavy metal base connected to Sweden made xy table. So no lathe.
?
I have a no much experience in metal working, but nevertheless I like to start good and new. Recently I started to inspection the mashine, I opened the gear case and I found 2 things:?
1 - the small squared brass piece (used for transporting the gears up and down) was laying inside at the bottom of the case (see pic).
2 - part of the grease inside seemed to be old (see pics)
?
1 > At that point I put back the brass on the arm and everything worked just fine. Actually I was able to change the gear position even without the brass, even thou I think it wasn’t the best. Does anybody know why this actually happened? I can’t really understand how this little piece of brass could came out from its arm, because the position it has “locks” it against its spot on the gears post.?
One thing to say: the milling column has been transported and stored horizontally inside a wooden box. Might it fell down during this time?
?
2 > Regarding the grease, I was now thinking to remove as much as possible from the 2 lateral windows without disassembling everything, and filling in a new one. Now, I already read many threads regarding which grease to use. I wanted to stick to the NLGI 1 lithium-based one advice on the manual, but I actually can’t find fine one like this that is synthetic. The only SYNTHETIC and LITHIUM based I found is a NLGI 2. The NLGI 1 I found comes always as MINERAL and LITHIUM based. Can somebody recommend me a NGLI 1 synthetic and lithium-based? Or would the NLG1 mineral and lithium based work as well? Or is it crucial to actually put NGLI 1?? Would the NGLI 2 work as well?
?
3 > Regarding oil for the vertical leadscrew and vertical column, SAE 10 motor oil, correct?
From:[email protected] [mailto:[email protected]] On Behalf Of sl129300 via groups.io Sent: Wednesday, May 14, 2025 9:35 AM To:[email protected] Subject: Re: [emcoV10lathe] Motor connection problem Emcomat 7 Δ/YY 220V
?
Hello, Carvel. Thank you for your help. I don't understand electrics well, but will try to figure it out.
The Δ/YY symbol denotes a 3 phase Dahlander connected motor
You need a 3 phase supply and the switch bank on the lathe must be for the 3 phase system
It should work well with a VFD which supplies the necessary 3 phase feed for either speed and a capacitor is not normally used
The wiring diagram is in the manual
If you don’t have a 3 phase supply then it should be possible to simulate the 3rd phase with a capacitor although it might run a bit hot with the 90 degree 120 degree phase angle difference
If you are not using the normal switch bank and you want to free wire it to test ?then the following sketch will hopefully explain how it works
The windings are connected in series (1) for slow speed and switched in parallel for high speed (3) and (4)? (redrawn)
For high speed the line connections to 1U,V,W are moved to 2U, V, W and the 1U,V,W connections are strapped together
From:[email protected] [mailto:[email protected]] On Behalf Of sl129300 via groups.io Sent: Tuesday, May 13, 2025 2:34 PM To:[email protected] Subject: [emcoV10lathe] Motor connection problem Emcomat 7 Δ/YY 220V
?
Hello. I bought an Emcomat 7 with a Δ/YY 220V, motor supplied by someone earlier. The previous owner tried to connect the lathe with a VFD, but the motor does not work correctly (no second speed). The Run Capacitor is missing. The motor wires are all brown and some have been painted in poorly visible colors by someone. Please help with the actual diagram of the motor connection. We have 220v single-phase network.
