开云体育

Newbie question

Giovanni IZ5PQT All Messages By This Member #8501 Hello folks, can you confirm that transmitting sub audio tones will spoil the communication, at least at 9600 baud? That's what I found and is probably well known.? 73 Giovanni IZ5PQT
MARINO MELONI All Messages By This Member #8502 Yes, you are right, when transmitting APRS, you should not use any subtone, as this cause disruption on the modulated 1200 or 9600 baud tone that are use to transmit the APRS signal.
David Ranch All Messages By This Member #8503 开云体育 Using PL tones on the the1200bps AFSK modulation version of APRS not only works but is apart of the specification called "Voice Alert": ?? I've never read about it being used on 9600bps FSK signals but I can see how it wouldn't work there.? Generally speaking, 9600bps APRS isn't very common for many reasons.? Read this for more details: ?? --David KI6ZHD On 08/10/2023 07:41 AM, MARINO MELONI via groups.io wrote: toggle quoted message Show quoted text Yes, you are right, when transmitting APRS, you should not use any subtone, as this cause disruption on the modulated 1200 or 9600 baud tone that are use to transmit the APRS signal.
Brian Webster All Messages By This Member #8504 开云体育 He wasn’t asking specifically about APRS, DireWolf is also used for connected packet extensively these days. ? Brian N2KGC ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of David Ranch Sent: Thursday, August 10, 2023 10:50 AM To: [email protected] Subject: Re: [direwolf] Newbie question ? Using PL tones on the the1200bps AFSK modulation version of APRS not only works but is apart of the specification called "Voice Alert": ?? I've never read about it being used on 9600bps FSK signals but I can see how it wouldn't work there.? Generally speaking, 9600bps APRS isn't very common for many reasons.? Read this for more details: ?? --David KI6ZHD On 08/10/2023 07:41 AM, MARINO MELONI via groups.io wrote: Yes, you are right, when transmitting APRS, you should not use any subtone, as this cause disruption on the modulated 1200 or 9600 baud tone that are use to transmit the APRS signal. ?
Giovanni IZ5PQT All Messages By This Member #8505 Thank you all, in fact I was trying packet in connected mode at 9600 baud, and it did not work. Then I discovered that? one radio had the tones on. When I put it off I got connection, However I did not notice problems at 1200 baud, 73 Giovanni?

Previous Topic Next Topic