Ok,?
I have it working. ?Thanks for reminding me about the CT-44. ?I actually have three of them that built up (I do a bit of Wires-X), so had a spare one. ?Apparently the FT60R¡¯s mic input isn¡¯t a standard TRRS, but the CT-44 works great with it. ? Of course, since I just had one combined line coming out of the EasyDig and the CT-44 has two inputs (speaker and mic), I had to use a splitter first. Then, since one of them is a 2.5mm input, I had to use a 3.5mm to 2.5mm adapter as well, but it all works.
Thanks for the CT-43 reminder!
toggle quoted message
Show quoted text
On Jun 10, 2022, at 5:50 PM, J K <kuhnje@...> wrote:
?
It¡¯s the cable. ?I have to do the same thing to get it to work with my FT70DR. ?Problem with pulpy the cable slight out is that audio goes both out the speaker and RX cable. ?Obviously I don¡¯t want audio going out the speaker. ?Looks like new to get this cable fixed.
13 Pro Max
On Jun 10, 2022, at 5:47 PM, David Ranch <direwolf-groupsio@...> wrote:
?
Oh interesting.. similar to this is a common issue
with Baofeng radios with programming cables and the issue is on
the Baofeng radio itself.? I've never heard this on Yaesu radios.?
Regardless, good to hear you got things working but you might have
a failing radio or a improperly made cable and this "iffyness"
will probably lead to unreliable packet connections.
--David
KI6ZHD
On 06/10/2022 02:33 PM, J K via
groups.io wrote:
I got it to work. ?I can¡¯t push the audio cable fully in the
FT60R. ?I have to pull it back out s little then it works.
13 Pro Max
?
There is a schematic posted here (bottom image
on the right):
??
To me, it seems like your Direwolf configuration using "DTR
RTS" should work.? Are you *sure* that /dev/ttyUSB0 is the
correct device for this blue USB to serial port cable?
--David
KI6ZHD
On 06/10/2022 02:26 PM, J K via
groups.io wrote:
It¡¯s an EasyDigi with USB PTT cable.
13 Pro Max
On Jun 10, 2022, at 5:16 PM,
Martin Cooper via groups.io <kd6yam@...>
wrote:
?
You
didn't say how you're connecting between the Easy
Digi and the FT-60R. Whatever cable you're using
needs to be carrying the PTT signal to the radio,
in addition to the audio signal.
Martin.
KD6YAM
Hi,
Is anyone else using a FT60R and EasyDigi?
I just received one.?It
receives well, but can¡¯t get it to TX. I¡¯m
using a Raspberry Pi running DireWolf. I
know the audio is getting out of the sound
device because if I plug in a set of
headphones, I can hear the burst. I¡¯m
thinking it must by the PTT (?). In
direwolf.conf, I have the following line for
PTT:
PTT
/dev/ttyUSB0 RTS DTR
This
is exactly what I used with the K2-2pin
EasyDigi with USB and it worked great. I
tried every variation of RTS, -RTS, DTR,
-DTR also and nothing worked.? Ie, i tried:
PTT
/dev/USB0 RTS DTR
PTT
/dev/USB0 -RTS DTR
PTT
/dev/USB0 RTS -DTR
PTT
/dev/USB0 -RTS -DTR
Any
help would be most appreciated.
Thanks!
13 Pro Max
