¿ªÔÆÌåÓý

  1. Direwolf
  2. Topics

INTERNAL ERROR? select_t1_value

 

Direwolf logs an ominous message:

INTERNAL ERROR? Stream 0: select_t1_value, rc = 2, t1 remaining = -999.000, old srt = 15.000, new srt = 15.000, Extreme new t1v = 30.500

... when attempting to connect via two digipeaters, immediately before retransmitting SABM. Excerpts from a log are attached.

This isn't really a problem, David Ranch.

InternalError.txt
InternalError.txt

 

¿ªÔÆÌåÓý


Hello John,

Per the comments in , please send the FULL output of Direwolf from it's very initial startup until the initial connection is made to the remote BBS.

--David
KI6ZHD


On 03/02/2021 03:28 PM, John Kristian wrote:

Direwolf logs an ominous message:

INTERNAL ERROR? Stream 0: select_t1_value, rc = 2, t1 remaining = -999.000, old srt = 15.000, new srt = 15.000, Extreme new t1v = 30.500

... when attempting to connect via two digipeaters, immediately before retransmitting SABM. Excerpts from a log are attached.

This isn't really a problem, David Ranch.
 

Here's a longer, complete log (with nothing snipped out), showing several connection attempts with different digipeater paths. The radio was turned off, so nothing was received. All connections were from the same client (Outpost PMM); the only difference is the digipeater paths. It seems noteworthy that only one of the three connections resulted in the ominous message.


On Tue, Mar 2, 2021 at 03:49 PM, David Ranch wrote:
please send the FULL output of Direwolf from it's very initial startup until the initial connection is made to the remote BBS.

direwolf-log.txt
direwolf-log.txt

1 - 3 of 3