开云体育

My first attempt with?telemetry.? This large Direwolf project got me to this point in one day.? Thanks.? Running on a Raspberry Pi 3, Raspbian Jessie.

Using SENDTO=RO to troubleshoot. Getting "Found fewer than expected number of telemetry data values." error message.

Here's the config:

CBEACON delay=0:10 every=10:00 sendto=RO via=WIDE2-1 infocmd="telem-parm.pl K7UOP-1 Temp Batt"
CBEACON delay=0:12 every=10:00 sendto=RO via=WIDE2-1 infocmd="telem-unit.pl K7UOP-1 degF Vdc"
CBEACON delay=0:14 every=01:00 sendto=RO via=WIDE2-1 infocmd="telem-data.pl `telem-seq.sh` `~/bin/aprs/get-values.py`"

And here's the direwolf output:
[0.0] K7UOP-1>APDW13,WIDE2-1::K7UOP-1? :PARM.Temp,Batt
Telemetry Parameter Name Message for "K7UOP-1", Ambulance, DireWolf, WB2OSZ

[0.0] K7UOP-1>APDW13,WIDE2-1::K7UOP-1? :UNIT.degF,Vdc
Telemetry Unit/Label Message for "K7UOP-1", Ambulance, DireWolf, WB2OSZ

[0.0] K7UOP-1>APDW13,WIDE2-1:T#685,57.4,12.5
Found fewer than expected number of telemetry data values.
Telemetry, Ambulance, DireWolf, WB2OSZ
Seq=685, Temp=57.4 degF, Batt=12.5 Vdc

Note that I'm using raw decimal numbers (57.4,12.5)?for values instead of three digit integers. Also BTW,? the APRS-TW program does not display these decimal values. It shows zeros? (with raw values being the integer of my values). It also indicates 5 analog and 8 digital readings.

I also wonder about the decoded?"Ambulance" thing too.

I plan to decode my own data so I don't think these are an issue for my purpose. But it would be nice if other programs could see that proper data.

I'm responding to my own post for an update.... This is a portable telemetry system, so ended up getting recommended GPS unit.

So, now implement TBEACON with compressed location using COMMENTCMD. Shows up fine in findu.com raw data. I insert that data into my server database event_log table.

Looking in?symbol.c I see that Ambulance is the default?symbol with ssid="-1"? and no SYMBOL specified in the beacon config.