开云体育

What is the correct way to address a specific CM108 for PTT. As I have multiple.

#cm108 #direwolf #ptt #windows

Wade Anthony #9579 What is the best way to address or point the direwolf.conf to a specific cm108 for PTT as I have three. ?I have the hid for it but not sure how to address it in the conf. Pic for example. Using windows and 1.7 w
WB2OSZ Member Profile All Messages By This Member #9580 This explained in the Radio Interface Guide, section 7.7. 73, John WB2OSZ
Wade Anthony #9581 Thanks John, That is what I followed to create this : ADEVICE 0 1 MYCALL VK1MIC-1 MODEM 1200 PTT cm108 "\\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" And it is still throwing multiple CM108 warnings when you are running direwolf. W toggle quoted message Show quoted text On Tue, 14 May 2024 at 10:32, WB2OSZ via <wb2osz=[email protected]> wrote: This explained in the Radio Interface Guide, section 7.7. 73, John WB2OSZ -- -- Wade VK1MIC.com HamShack Hotline: 55000 00051 (leave a message)
Martin Cooper All Messages By This Member #9582 Despite the red text, the output does say, farther down immediately after the first green line, that it is using the device you specified: "Using \\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} GPIO 3 for channel 0 PTT [...]" Is it not working? Or are you just concerned about the red text? Martin. KD6YAM toggle quoted message Show quoted text On Mon, May 13, 2024 at 5:40?PM Wade Anthony via <Wade.vk1=[email protected]> wrote: Thanks John, That is what I followed to create this : ADEVICE 0 1 MYCALL VK1MIC-1 MODEM 1200 PTT cm108 "\\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" And it is still throwing multiple CM108 warnings when you are running direwolf. W On Tue, 14 May 2024 at 10:32, WB2OSZ via <wb2osz=[email protected]> wrote: This explained in the Radio Interface Guide, section 7.7. 73, John WB2OSZ -- -- Wade VK1MIC.com HamShack Hotline: 55000 00051 (leave a message)
Wade Anthony #9583 Hi Martin. Thanks.? Yes. I was concerned about the red text as I thought (potentially wrongly from your reply) that I wasn’t structuring the command correctly to use the correct cm108 (I have three connected).? - VK1MIC.com toggle quoted message Show quoted text On Tue, 14 May 2024 at 10:58, Martin Cooper via <mfncooper=[email protected]> wrote: Despite the red text, the output does say, farther down immediately after the first green line, that it is using the device you specified: "Using \\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030} GPIO 3 for channel 0 PTT [...]" Is it not working? Or are you just concerned about the red text? Martin. KD6YAM On Mon, May 13, 2024 at 5:40?PM Wade Anthony via <Wade.vk1=[email protected]> wrote: Thanks John, That is what I followed to create this : ADEVICE 0 1 MYCALL VK1MIC-1 MODEM 1200 PTT cm108 "\\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" And it is still throwing multiple CM108 warnings when you are running direwolf. W On Tue, 14 May 2024 at 10:32, WB2OSZ via <wb2osz=[email protected]> wrote: This explained in the Radio Interface Guide, section 7.7. 73, John WB2OSZ -- -- Wade VK1MIC.com HamShack Hotline: 55000 00051 (leave a message)

Previous Topic Next Topic