开云体育

Hello All, I am currently working on my fifth RPi/Direwolf APRS installation, and have ran into an issue which has me stumped and hoping someone in the group has an answer for, or at least, can give

BPQ32 node stack, or LinBPQ on Linux, has a TNC emulator. It's complicated to set up but will do what you are asking for. http://www.cantab.net/users/john.wiseman/Documents/BPQ32.html On the other

Hello Nick I'm only aware of linbpq32 with it's TNC2 emulation will do something like this. It's a bit overkill to run a complete BBS package to emulate a TNC though. Can you tell us what you want to

Would anyone be able to tell me what software (Compass Linux on a Raspberry Pi) would be used with direwolfs KISS TNC port ability to get full TNC command emulation? IE: So I can just connect minicom

I've managed to get a very crude hack working to connect APRSDroid and Direwolf on a Pi Zero W. Pi Zero W has built-in WiFi and Bluetooth. Paired my Nexus 7 with the Pi Zero W. Make the Pi

Hello Arnold, Yes, or connect up the HDMI display with a USB keyboard. --David KI6ZHD

David, " When your Rpi isn't connected to the network, what is in the /etc/resolv.conf file? Anything? Is DNSMasq running? " How would I know??? I suppose I could connect to the serial port for a

Hey Arnold, When your Rpi isn't connected to the network, what is in the /etc/resolv.conf file? Anything? Is DNSMasq running? --David

Somehow I missed putting this in the email. It IS in the DireWolf configuration. ADEVICE plughw:1,0 ACHANNELS 1 CHANNEL 0 # Home call MYCALL KQ6DI-4 I DO have PulseAudio removed. I don't think it is

Usually you would have something like "ADEVICE plughw:1,0" when running on the Raspberry Pi. I don't see ADEVICE in there which would result in using the "default" device. Did you make sure that

David, I should have provided you with the DireWolf configuration. The following is the configuration I have for this Zero. Anything not included is commented out. These are the only active

David, Correct, I am not using any Linux AX.25 Stack. I am also not including any HamLib support in the DireWolf build. The Hub I am using (that works) could have an external supply, but it wasn't

Hello Arnold, There have been random reports about these delays and I've seen it too. I didn't correlate it to being related to having a USB hub in front of the sound device but that's weird. In the

So I put the micro USB hub #2992 back in Without the WiFi USB thing, and my problem went away. However that USB Hub does have an ethernet port, although nothing is attached... Just the Sound USB

I asked this question before and didn't get any answer, so now I've done more testing and have a major clue. I have a Raspberry Pi Zero running DireWolf that has a very long transmit delay. First, I

I've been researching and trying to see if it's at all possible to run Dire Wolf with a virtual TNC over Bluetooth SPP for use with APRSDroid. I can easily do it over TCP/IP, but Bluetooth is more

Check out freedompop on sprint, aka cdma. Free 500 megs each month and easy to root and hotspot most devices.

David, thanks. My bad; I had not in fact read the 1.3 docs as you can guess. :) Figures that I am looking at the guts of source code instead of the obvious. All better now, though. -Mike K0FSJ

Hello Shimniok (no call given), I assume you've configured a Tracker beacon (tbeacon) in your direwolf.conf and also configured the use of your GPS using either the GPSNEMA or GPSD keywords. Looking

I'm running into a TBEACON error on RPi / direwolf 1.3. I searched github issues, googled, and searched yahoo groups -- to no avail. I figured I'd ask if anyone's seen this... On RPi 2, newly