开云体育

Tobias: You forgot to include an SSID after your callsign for the APRS-IS server login. IGLOGIN KK7BCO 19620 should be. IGLOGIN-10 KK7BCO 19620 (or whatever SSID you want to use.) The list of SSIDs

Looking at the file, the only thing I see is that the PBEACON line is separated into 2 lines in the file. Not sure if that is a text editor issue where it "wrapped", but I am pretty sure the whole

Thanks for the positive feedback! Robert Giuliano KB8RCO

Opps.. I totally missed seeing Rob's spot on answer here before I send my own. Sorry for the noise. --David KI6ZHD

Hello Tobias, Ok.. though it's strange the new setup decodes more remote stations than the SDR. I have to assume there were some non-optimal settings on the SDR's various gain stages, etc. at play

Robert, The conf looks correct. I am able to ping the server, but not able to log into it using telnet from the terminal. I have double checked my pass code

In order to login and pass traffic to the APRS-IS servers you need 2 lines in your direwolf.conf file: IGSERVER {APRS-IS

Hello, Last year I built an iGate using an RTL-SDR.com dongle. It stopped working a little while ago when I ran a Linux update, so I decided to start over using an Rpi 3A, a Sabrent soundcard and an

Seems to me that a rudimentary hardware approach might be easier and more sensible. Find switched +12 volts from the IC-9700 and use it to turn on a relay to open PTT between the sound card and the

Hello Mike, What you describe should be completely possible. To me, the basic steps would include: - Make sure the antennas between the two radios are as far apart as possible to minimize any

Very vague memory on this, but when I was first setting up my packet station I saw the same message. The fix, if I recall, was a setting in setting up the KISS interface to the AX.25 stack.

Thank you for asking. Please refer to? "AX.25 Link Access Protocol for Amateur Packet Radio Version 2.2 Revision: July 1998" which can be found here:

I would first check the swr for the two radios. If the swr is high it could cause the transmitter to go spurious. I would also consider reject cavities to keep one transmitter out of the other one.

Hi All, Im having an issue with my APRS Digi intefering with some other equipment. Im running my APRS Digi, iGate and weather node on a Pi 4 with a NW Digital Draws HAT interfaced with a Kenwood

I've just installed Direwolf into a few Windows 10 & 11 machines. It all seems to work. However, when checking for messages with Winlink Express I see a line on the Direwolf window (on the computer

Hmmm.... I've only tried IL2P a few times and I thought Direwolf reported when the IL2P protocol was enabled. What do you see when you start up direwolf with debugging options given at the command

hi here is the statup screen with IL2P enabled

What shows up on the screen when you start direwolf? It should show what devices and modems are enabled via the direwolf.conf file. I looked at the source code and it gives the impression this is

Hi I have configured 2 channels in my dirwolf. conf. One for HF and one for VHF. I'm using the dev branch of the Github repository. My dirwolf.conf looks like this I would like to activate the

Hello dameiners, What did you use to adjust the audio? You should use 1) pavucontrol to make sure the correct sound it routed to Direwolf, 2) I prefer alsamixer to set the actual audio levels and