开云体育

Alamogordo Amateur Radio Club 开云体育 Hams In The Tularosa Basin And Around The World And Beyond AARCs' 38th Annual Hamfest 31 Aug Labor Day Weekend 2024 from 7am to 3pm-ish (depends upon

The -L log format is not the same as the -l format? Is there a way to make the -L format the same as -l? With -L I'm getting a copy of the console output.

Hi Martin. Thanks. Yes. I was concerned about the red text as I thought (potentially wrongly from your reply) that I wasn’t structuring the command correctly to use the correct cm108 (I have three

Despite the red text, the output does say, farther down immediately after the first green line, that it is using the device you

Thanks John, That is what I followed to create this : ADEVICE 0 1 MYCALL VK1MIC-1 MODEM 1200 PTT cm108 "\\?\hid#vid_0d8c&pid_013a&mi_03#7&3b2381f1&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}" And

This explained in the Radio Interface Guide, section 7.7. https://github.com/wb2osz/direwolf-doc/blob/main/Radio-Interface-Guide.pdf 73, John WB2OSZ

What is the best way to address or point the direwolf.conf to a specific cm108 for PTT as I have three. ?I have the hid for it but not sure how to address it in the conf. Pic for example. Using

It's working now. I think that the problem was that i had squelch on. I let all of the noise in and now get this. Thanks to everyone for the help. direwolf -a 10 -t 0 -n 1 -b 16 -B 1200 -r 48000

It's a 'work in progress'. I don't mind sharing it.? It is 6 python files and source for a web page to control the 'engine'. (index.php, css, javascript). It basically works for audio listening, but

Andrew, excellent and fair point, I am in a pretty rural location, I have been able to decode packets in the past using my Openwebrx setup but lately not at all, the previous decode was using a long

Just out of curiosity, are there any packets to be heard in your neighborhood? You said you were in Alberta; that's a pretty big province. Where in Alberta are you? A big city like Calgary? You might

i wasn't getting any packets so I added the gain =g 21.0 is it necessary to that?? I know that the iGATE is talking to the server because my icon shows up on https://aprs.fi but never any packets

Hello runcer, Looking at that original article you posted, that's dated from 2017 running Direwolf 1.4 which are both very old. I would recommend that you start with a newer OS such as Bookworm

In the documentation directory, https://github.com/wb2osz/direwolf/tree/master/doc , you should find a file called? Raspberry-Pi-SDR-IGate.pdf. If you run into issues, let us know exactly how far

I have this hardware and I want to build a RX only iGate for my pi3B which I can leave on always.? Can you suggest a set of instructions or walkthrough? FYI I am in Alberta Canada.? Thank you. -

Is the UDP audio stream going to the correct port? Is the SDR radio producing 16 bit (LE) audio samples at 48,000/second? Try putting "-a 10" on the direwolf command line. 73, John WB2OSZ

I meant to type narrow fm.

Hello Bob, That software should work though it is old as v1.7 was released on October 28th: https://github.com/wb2osz/direwolf/tags Since then, the new DEV branch is tracking the v1.8 code. I

Hi Bob, I'm surprised by "narrow side band", shouldn't GNU Radio be configured with a NBFM (Narrow Band Frequency Modulation) demodulator for this purpose ? Do you mind sharing your python script

This is on Ubuntu 22.04. I have a non-gui gnu radio python program that tunes into 144.39 MHz, narrow side band and sends 48k audio to an audio sink and also to the UDP sink. I can control the app via