开云体育

I think you can already do that. From memory: ADEVICE plughw:1,0 null I think that was the right syntax. Basically tell DW that there is no audio device for transmit.

Would it be possible to have DW coded so a single Channel could have a Receive only mode as well? For example: CHANNEL 0 MODEM 9600 RCV_ONLY 1200 If so, I can put a request on the github site.

Thank you all very much for guiding me toward the rear ports, I think I am well equipped to head in to the realms of making/purchasing a cable for this. KK6FPP - I am using this as part of a home

Hi Neil, We are using Yaesu FT-7900 radios for Packet Communication within our local ARES/RACES group and those radios are a good choice for that purpose. As others have already mentioned, do use

You might find the direwolf Radio Interface Guide helpful. https://github.com/wb2osz/direwolf-doc/blob/main/Radio-Interface-Guide.pdf 73, John WB2OSZ

Hello Neil, No.. it should work fine. Both the FT897 and the FT7900 offer a rear 6pin DIN connection so that should make moving things over pretty easily. I would recommend to re-verify the RX and

???????? I don't have a FT7900, but hyave worked with the FT7100 and FT8800 (previous, similar models).???????? You don't say what interface you are using, but these radios do NOT have

Good afternoon (at least here), I am considering attaching a Yaesu FT-7900 to a RPi for use with DW as a Digi... I've got it (mostly) working (I think) on a FT897D, but I'd rather not tie up the

Awesome, welcome back to good old command line packet! You live in an area where there is still a lot of on air packet activity. If you haven’t joined us on the EastNet groups.io page I would

I hooked up my old PK-232, connected to my serial port 1 and hit "shift+*" and BAM! She came right up. No need for software when I can do it this way!

W2LPC, There has been some good advice but and here is my two cents. Putty is a good terminal program to use with the type of TNCs you mentioned. I use it with an old MFJ-1270 serial TNC, I also use

I noticed that there are a bunch of different OS images, based on the specific Nano Pi model. Do you have the one for your specific

I would recommend not to assume and to try it. I imagine it won't work and if it doesn't, this isn't a direwolf issue. This will probably be some specific OS issue, OS configuration issue, etc. I

John, thank you! But GUHOR:( Audio device for both receive and transmit: default (channel 0) Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100 sample rate / 3, DTMF decoder enabled. ... DNS-SD:

Try this: ADEVICE default 73, John WB2OSZ

Check out EastNet Packet group on Groups.IO you can. Get a lot of help there with what your wanting to do. I'm just starting to get back into it. Originally from Sussex County NJ moved recently into

David, hello Yes, I tried to play the test file, it plays. I haven't tried the recording, but it probably works too.... root@DietPi:~# aplay sample-15s.wav Playing WAVE 'sample-15s.wav' : Signed 16

Hello VE7LTN, If you configure say a PBEACON in the direwolf.conf file.. does that key up your radio when the beacon fires How does Direwolf key up your radio? A GPIO pin? Say an RTS pine from an

Yes, I have been on the SNA node before. I downloaded the Paxon and will try it this weekend. I've had my PK-232's since new in 93' and haven't been on in about 4 years. I can't wait to get back on

What do you have for PTT in the configuration file? There are many different options and you need the one matching your radio interface.