开云体育

First question would be about path settings. Does UZ7HO have path settings that are extending the reach of your packets (and Direwolf does not)? Otherwise, I see 2 sides to consider: The lack of a

I always used Direwolf for APRS. Now I was trying to use Direwolf + EasyTerm to connect another station using a hardware TNC. It seems that the packets from Direwolf aren't recognized by the other

Hi David, Thanks for the response. I'm not looking to use the built in packet handler, because of it's limitations as I mentioned; and it won't be compatible with AX.25. There is however a "Direct

Syntax errors from what??? I need to see how you are formatting your symbol filter.?? And exactly what is saying what about syntax errors... But / is the primary table, \ is the secondary table,

What about one like this that has a “/“ in the table? https://aprs.fi/?c=raw&call=WB4FAY-4&limit=50&view=decoded I’m getting syntax errors. [email protected]> wrote:

Lynn, Outstanding! This is exactly what I needed. the server-side filter is operating as expected! I didn't even know about the "minus" sign for exclusions. Thanks for passing along the telnet options

And so can the display UIs of some of the other APRS clients, but that isn't an option for the filter used on the machine-to-machine feed from the APRS-IS backbone servers to a client system. Andrew,

There is also a differentiation in normal (non-MicE) position reports; depending on which of 4 different prefix characters (!, @, =, or /) is used, you can specify: 1. Whether this position report is

On the APRS.FI page I can set a filter for items moving >2MPH.

Unfortunately, the APRS system has no definitive way to determine if any given station is truly message capable.?? There's some distinction in the Mic-E type codes, but that would only apply to

Great!?? If you go to aprs.fi's raw packets page for these stations and change it to "Decoded", you see that they all share: And if you reference the APRS-IS filter definitions page at

That's a great point. I have no idea how to generate it but I would like to only get stations that are either moving or can respond to messages? Only getting "moving" stations or not "fixed" stations

Hey Lynn, Thanks for the response. here are some examples: 2 dstar repeaters: https://aprs.fi/info/a/KI4SBB-A https://aprs.fi/info/a/K4DSO-C 2 hotspots: https://aprs.fi/info/a/WN4VSU-B

That black diamond D is supposed to be for D-star gateways (co-located with D-star repeaters), not for hotspots. If the hotspot users are overloading that symbol, that's a problem. In any case, you'd

If you provide an explicit callsign-SSID (or more than one), we can look at their raw packets and make sure we're advising you on the correct symbol filter to select those stations. Lynn (D) - KJ4ERJ

does anyone have experience with symbol filtering? I want to remove digital hotspots from my server feed. They all seem to have this black diamond with a D in the middle (attached). [image: image.png]

Looks like it's ignoring a packet sent too fast.

Looks like it's ignoring a packet sent too fast.

Running -l . Log only has wide info if it's part of a comment or if in a beacon. Didn't see any other logging options. I'll try to do a screen grab. Jerry

Dear Thomas, Thanks for such a detailed and useful reply - I didn't realise I could set the tone values in the direwolf.conf file. I followed the the Xastir Wiki and ran the "devcal" application on