开云体育

@Gil Rand Wow, that was so helpful, sir. Thanks for the insight. -- = = = = Kevin? --? KD9EFV

My guess would be the high reliability operating system being the problem. wrote:

All, I've made tons of progress these past few days.? I think I've finally got it.? I'm not afraid to admit, I used ChatGPT extensively these past few days.? I realize you have to ask very

Hello Phil, You didn't provide any details about your setup but if I was to guess, I would say it could be RFI getting into the USB sound system and removing the USB-connected sound card. As for

Hi all, my direwolf is on Windoze 7 and works fine for weeks. It then crashes and exits at random. I have looked for logs but can't find any. There is plenty of information about Linux but not much

Thank you all.? I did get it to work with direwolf 1.7 and help from the code's author John. I commented out the AWGports because I am not using them. my conf file is: #HF ADEVICE?

Was that just implemented for TCP KISS? Or did you just not post the AGW code? As stated in a previous post, I know the TCP KISS works, but as noted from the code, that is specific to receive. I am

In V1.7 of Direwolf, you can split the TCP/IP ports per ACHANNEL. Some applications (namely APRSIS32) will receive the multiple "streams", but only transmit on the first.?? (Lynn hasn't implemented

Hello Greg, When you say you only see your "channel 2 ports", what do you mean? Is it because you don't see the specific AGW and KISSTCP ports that correlate to your "channel 2" actually applied to

Thank you. I have tried various things.? It appears that it will only recognize the 2nd set of listed ports,? the first set gets ignored.? It doesn't matter what number they are assigned. My

The author should confirm, but I don't think Direwolf supports per-channel ports for the AGW and KISS protocol sockets. Both protocols support specifying which channel you want to use natively, so you

The question is what are you seeing your CHANNEL 2 port with? Since you have defined different KISS and AGW ports for each interface, you need to connect to both 8001 and 8003 (or 8100 and 8101) at

Hello I am new to this group.? I tried this in the beta release 1.7 and when I run Direolf I only see my channel 2 ports In short : ADEVICE? plughw:1,0 ACHANNELS 1 ADEVICE1? plughw:4,0 ACHANNELS

You might look at SV2AGW's agwterm: https://www.sv2agw.com/downloads/ -- 73, AB1PH Don Rolph

As I understand it, the goal is to use the connected mode packet radio protocol implemented in direwolf. KISS is not capable of accessing this layer so it is necessary to use the AGW protocol. I'm

Doug, I've long started Direwolf from systemd and the significant difference I see between your Unit file and mine is I start "After=sound.target"? I used to start from screen as you do but for me,

You might find this helpful: weather_station.pdf?? in https://github.com/wb2osz/direwolf-doc. 73, John WB2OSZ

I have a weather station and I want to connected to the aprs service using my existing I get and DG Peter can anyone with me in the right direction please thank you

Bi-directional interaction. Yes, I would consider using the KISS interface to software modems. Of course, that would require the terminal to implement most of the AX.25 protocol.

Hello John, I'm aware of a few various packet programs for various OSes here: https://www.soundcardpacket.org/6compat.aspx#Terminal