开云体育

Hello I am new to this group.? I tried this in the beta release 1.7 and when I run Direolf I only see my channel 2 ports In short : ADEVICE? plughw:1,0 ACHANNELS 1 ADEVICE1? plughw:4,0 ACHANNELS 1

You might look at SV2AGW's agwterm: https://www.sv2agw.com/downloads/ -- 73, AB1PH Don Rolph

As I understand it, the goal is to use the connected mode packet radio protocol implemented in direwolf. KISS is not capable of accessing this layer so it is necessary to use the AGW protocol. I'm not

Doug, I've long started Direwolf from systemd and the significant difference I see between your Unit file and mine is I start "After=sound.target"? I used to start from screen as you do but for me,

You might find this helpful: weather_station.pdf?? in https://github.com/wb2osz/direwolf-doc. 73, John WB2OSZ

I have a weather station and I want to connected to the aprs service using my existing I get and DG Peter can anyone with me in the right direction please thank you

Bi-directional interaction. Yes, I would consider using the KISS interface to software modems. Of course, that would require the terminal to implement most of the AX.25 protocol.

Hello John, I'm aware of a few various packet programs for various OSes here: https://www.soundcardpacket.org/6compat.aspx#Terminal https://www.dxzone.com/catalog/Software/Packet/

Perhaps try using the sound target instead of network? After=sound.target You might benefit from understanding why it's exiting. I'm not sure if you'll see the logs in journalctl if you're running it

Are you looking for bi-direction information, or just monitoring the (received data from the remote station)? Also, are you stuck on AGW or are you willing to entertain KISS over TCP/IP? KISS over

I'm trying to run DW from a service on boot.? It starts and then stops.? I suspect it's stopping because the USB soundcard isn't initialized yet.? Wondering how to start the service after the USB

Can you recommend software to interact with a remote station from a command line, using the AGW interface to Direwolf? I'm aware of QtTermTCP and EasyTerm, but those are GUIs. I'm looking for

Hi All, Its a custom modified cm108 originally built for AllStar Thanks Matthew

I have only seen this happen on the "communication device" with VOICE command active for microphone activity. But I assume it may have similar capability on the speaker side. Also, some devices have

Hello Matthew, Which CM108-based device are you using? --David KI6ZHD

Are you talking about DINAH? If so, you need to cut jumper JP3.? It is mentioned in the second paragraph of the Overview section in https://kitsforhams.com/dinah and a couple times in

That is 'THE" most likely the cause and if you can disable the COS on the radio, it should solve the problem. However, I will add one additional comment.? With Windows 10 and even more so with

Hi Thomas, Of course, that makes total sense. This sound card has COS hooked up to VOL DN. I'd rather not modify the sound card but I should be able to disable the COS output on the radio. Thanks

Hi Matthew, This is a somewhat common issue when using C-Media CM-108/109/119 based USB sound fobs/dongles. Some of the instructions (especially those for Allstar Nodes) for using C-Media chips as

Hi all, I'm testing the 1.7A Beta Release on Windows 11 with a CM108 based sound card. For some reason when Dire Wolf receives , the output volume? of the CM108 reduces. On longer packets it reduces