开云体育

Tim, I followed your instructions and when I try to view my igate on port 8080 in a browser, it gives my a "connection closed" message. Any ideas? Thanks, Paul KK7BIZ

David, I've reviewed the user guide regarding digipeating. I see where my digipeater may not repeat packets as a stronger digipeater may win out. However, I have my HT set at low power and when it

Thanks to all. I have managed to get it working by buying a different USB sound card from Amazon. The new one identifies as 'USB Audio Device' for receive and transmit, rather than separately named

Hello Fred, How are you judging that it's not digipeating? Because you don't see the Direwolf setup transmit or because you don't see your digipeater being the relay station according to aprs.fi? If

Hello Everyone, I just built a standalone digipeater running Direwolf. The digipeater is beaconing just fine as I'm able to verify the beacons on aprs.fi. However, it is not digipeating. I have tested

Oh! That's different. You would have to send an Object message (not a self position beacon) that is precisely formatted to be compatible with the Kenwood's built-in TNC.

Luc, You want to configure YOUR direwolf to send the correct APRS packet so that OTHER PEOPLE with Kenwood radios can use the Tune button to QSY to your repeater, yes? To: "direwolf"

Okay, thanks, I'll butt out then. [email protected]> wrote:

Hello Luc, The D710's "tune" button is on the control head so when the APRS system running on VFO-A decodes a specific APRS beacon packet and you press the "tune" button, the radio can QSY VFO-B to

Hello everyone, Wow, you said several things OK, if I understood correctly at the level of the repeater where my Rasperry is located with Direwolf I must have a Kenwood radio to connect with my

Or if you already have RT Systems software for either the TM-D10A or TM-V71A, you can use the USB-K5D Programming Cable. Danny, K5CG user of YAAC :) To: "direwolf" <[email protected]> Sent: Sunday,

YAAC's repeaterfinder plugin has the logic to parse APRS repeater objects and send the commands to tune a Kenwood radio as well. You need the Kenwood PG-5H cable to the transceiver body to send the

Hi Luc, The Tune function is a feature of the TM-D710 and some other radios whereby you can have the non data-band side of the radio QSY to the frequency advertised in an APRS packet, but only IF the

I took a look at the referenced PDF.? We have had Stephen (WA8LMF) give talks at club meetings. He makes a lot of good information available to the HAM community. And it has been my experience that

Hello everyone, this morning during our amateur radio lunch there is one of my members, who asked me a question about DIREWOLF it works with a Kenwood TH-D710 radio and he tells me that he has a

The block diagram is a bit harder to follow for me, and I found it after I looked at the PDF. The schematic in the PDF is much easier to follow. The input audio is amplified by the first half of the

Rob and Sid, I think all of the op-amp circuit is not present. The gist as I see it is the audio is amplified, rectified to dc, which charges the capacitors for a hang time into the second half of the

Thanks for responding, Rob.? Yes, as I understand it and hope, the circuit is meant to activate the PTT while it's sending APRS data, like VOX.? The designer (see link below in the thread)?claims

In theory, that is the purpose of the 4N25 optoisolator.? However, in practice, the sound card is not differential, so it really isn't isolated. As for the rest, I am not sure what you are trying to

thank you David that works just fine took me a bit to gather that the command actually needs to be in 2 places not sure why that is, maybe a definition? and then a execution but it works great I