开云体育

As I reread David's question, I am a little confused. If you configure ICHANNEL 0, I would assume that would cause an error. The other option would be the data from the soundcard would be 'muted' and

Verified the ICHANNEL will distribute the APRS-IS packets to all KISS clients on assigned port.I only had 2 going, but both received the data. Robert Giuliano KB8RCO

Yah, I'm with you on that, using ramdiscs in remote locations now. I use logrotate as you suggested, I didn't know direwolf has that kind of feature.? Let us know what you come up with.

I could do what you suggest, but the think I like about the -l option is that its supposed to create a daily log file so it will clean up after itself.? ? This setup will run in a very remote

I can't explain the -l/-L options.. you could redirect all output to a file with direwolf > /var/log/radio/direwolf/direwolf.log 2>&1 I happened to use "tee" in my implementations, direwolf -d t -p -q

I am running direwolf with the -l option, but it's not writing the log files to where I specify, its still writing to stdout.? ?I don't have log file settings in the conf file and I tried putting a

Did you ever get this written? I'm brainstorming how to write a KISS packet terminal and I'm wondering if a KISS library already exists. I haven't been able to find much and writing one from scratch

wb2osz kind of coded it up in a day or so for me as a special request for balloon tracking. I only attached 1 KISS device (an APRS client), so can't say whether it would send to all attached devices -

Thanks for that Rob. I vaguely remember this one but it's not documented anywhere other so I kept my mouth shut. :-) I now see it in the DEV branch's source code but there is no real description of

Some time ago I requested the APRS-IS traffic be available over TCP-KISS port. That was implemented in V1.7C, and you can assign the port in the configuration file:

Hello Angelo, It's not very clear to me what you mean by "KISS terminal". Are you asking if a packet comes via the APRS-IS TCP connection, you would want that packet to be sent out on all KISS

Hello Matt, Good to hear things are working now. If you want to hard code the sound card to run at 48Khz instead of say 44.1Khz, this can be specified in the ARATE line in the direwolf conf file per

One option for autostart is to use systemd. See /g/direwolf/topic/91691820#6655 73, Lee K5DAT

OK, Lads: Gave up, Wiped, reinstalled, running ok with Shot-gunned conf and sh files sprinkled in each directory (I hope). Would like to 'force' 48KHz sampling shows as E/3, Yes I know it 'hogs' TOP

Hey Adrian, Author and Maintainer of Linpac here. There are lots of good guides out there on setting this up and mine for Debian based systems is here: #This takes you to the /etc/ax25/axports

Hi All, I am completely new to AX25 in Linux, I have managed to install and get Direwolf working, I am struggling to configure the AXPORTS file for use with my Signalink USB and to clear an errow on

Is there a way to have KISS also read/output packets that are being sent by Direwolf to RF? My use case is that my messaging and net bot, which runs on top of IORETH -

Is there a flag or setting to enable packets that are being transmitted by Direwolf to be read by the KISS terminal? I had been using DW 1.6 and recently compiled 1.7 on Raspbian. My use case is that

Ok.. one problem down since you disabled the Igate config. Next is an issue with all your errors when you run "arecord -l". The missing left side of the screen makes things hard here but as a guess,

I'd ran out of Inet Hardplugs so it was looking for inet and the error print is squinty Commented IGATING out Between a PKT/VARA dual-mode & radio concurrent RMS, my Aging Trusty Tecra i'm out of