开云体育

Computer: PC OS: XP 32-bit TNC: Kantronics KPC-3+ External soundcard: SignalinkUSB Software: Direwolf, Outpost, APRS32, MMSSTV In practice I use APRS32 with DW and SignalinkUSB. For Outpost I

Computer: PC, 64 bit Windows Soundcards: external SignaLink, external?Masters Communications DRA-65 TNC: Direwolf Software: Outpost, QtTermTCP, Winlink Express AX.25 works better when you adjust the

See below. Ww2bsa@...> wrote: Raspberry PI Zero 2 W 32 bit Raspberry OS external DINAH Dire Wolf

Hello Members, I am creating a user guide for new AX.25 packet radio operators that include current as well as legacy equipment. Since this is a Direwolf Group, it would be grat tp know what is

On many systems (like the Pi), the playback and Capture devices may be listed separate, even they they are on the same device. Press <F6> to get a list, and it should show a list of devices. See if

Hello Lynn, Signalink units have limited controls via alsamixer as some of their controls are ONLY available via hardware POTS on the front of the unit. There is the F3 view to set playback levels

Greetings, I'm trying to get direwolf on a Raspberry Pi to use a SignaLink USB as the audio interface to an IC-706MKIIG.? I've used this SignaLink/radio combination from Windows for many years, but

Hello VK8MT, How did you install direwolf? Did you get the program from the Raspberry Pi OS repos or did you manually download it from somewhere else? Anyway, can you send the list the output from

The library in question is the HamLib library.The first question would be whether or not that has been installed? ? This site has some infomration:

Hi I'm get the error described on page 21 of the User Guide, 'direwolf: error while loading shared libraries: libhamlib.so.4: cannot open shared object file: No such file or directory.? The issue is

Hello Neil, Rob already provided a set of initial answers to your packet questions so I won't duplicate the answers here. That said, here are some "intro to packet radio links" that might help you

Folks, Updated information regarding Direwolf and Hamlib for the IC-F8101.? I have it properly working FINALLY! Step one. Download and compile Hamlib for your platform.? The version must be the

Hi Niel, See if Direwolf decodes anything on 145.01 and 145.07.? You might have to park the radio on each frequency for a while.? The nodes most likely send periodic beacons.? If you copy anything

What does 'callsign+SSID' mean?? In my previous experience, I just knew about callsigns, and the number at the end(e.g. n8ssw-1 usually was the mailbox) which I always assumed was just a different

KB8RCO and KI6ZHD, The callsign here is n8ssw(original).? Pleased to meet you. I have read your suggestions carefully, and I have some updates, responses, and questions. I will post the results of

Hello Neil, Welcome back to packet! Just to be clear hear, you're saying you have one packet station and you're 99% sure there aren't any other classic packet stations near you? If so, how do

The Appalachian Trail Golden Packet event? is a n annual tradition started by WB4APR in 2009. The goal is to set up 15 temporary VHF/UHF APRS stations on mountain tops , along the Appalachian Trail,

You say?? ? ? "I can also listen with a second radio with an open squelch and hear my connect packet?? ? ? transmission."Connect the audio from the second radio to another instance of Direwolf

Hello everyone. I am looking for some advice on troubleshooting direwolf+linpac. The madness(and fun) started a few days ago when I learned that direwolf existed, I immediately jumped at the idea of

or perhaps direwolf -t 9 which will show a range of text colour combinations that it supports. Then you can take your pick as to which suits best.