开云体育

Hi David, Thanks ! I had it setup this way "ADEVICE -? plughw:1,0" Without the dash in the middle made it worked!? I am using it on a Raspberry Pi. Thank You ! 73 Lot / k6irf

Hello Juan, You didn't mention what operating system you're running this on but ultimately, your direwolf.conf file has an error. For example on Linux, your ADEVICE line should look

Hi Everyone - I am having problems with decoding packet signals. I already checked the receiver and input to mic in of cm108 soundcard. I can record through it and working well. The one I want to

After you start direwoll but before you run kissattach, please send us the results of the two following commands: ps aux | grep -i kissattach ls -la /tmp/kisstnc --David KI6ZHD

I just tried a couple of times. Only the required software running. Same results.

Hi David, so, as far I can understand, you redirected the STDOUT to a log file, right? My dashboard works on the log file generated when you execute direwolf specifying option "–l" (lower case L) on

Hello Alfredo, My script parses the Direwolf STDOUT decoded log. If the detail is in that log, it tracks it. I'm not sure what you are referring to here. Maybe Ross's Grafana based

Hello David, thank you for the info. Grafana is very interesting, I will have a look at it! Your script is also very interesting, although it's a sysop tool and the results are not publicly

Hi Mike, I wasn't aware of this, thank you for the reporting. I did copy&paste from a post that I did on Facebook APRS group , so this intrusive social media automatically added that part. Sorry for

One last question - the remote station (VY1EMO-9) instance of Direwolf log It appears to mean that Direwolf found the symbol for a bus (the vehicle) in the ack message. At least, that's the only

are you aware it first goes to Facebook? Mike

Hello Rick Ok.. that means your stack was still auto-discovering your KISS setup. If you tried your connection a SECOND time, it would have worked for you without this specific kissparms

kissparms -c 1 -p w2lk ... did the trick. I m now able to connect, send and receive email... another problem has cropped up:

Hello Rick, Ok.. it sounds like you don't have your Linux AX.25 stack setup correctly. Once you configured your /etc/ax25/axports file, how are you bringing up the stack using the kissattach

Hello Alfredo, Thank you for posting your project and it looks like a very nice start! Along these lines, Ross KJ7GES posted a similar project using Grafanna and Prometheus (

kissparms -c 1 -p "radio" ... did the trick. I have been able to connect, send and receive email using Direwolf/Pat-AX25

Thanks, Martin. I'm aware of those restrictions and I'm sure I have crafted the message as per the APRS spec (and your example). I'm using a Raspberry Pi running Direwolf as a TNC for Xastir to send

Great job Alfredo! I was also thinking on something similar, I'll follow the development, hoping to find time to contribute. All the best 73, Fabrizio IU5GEZ Il giorno lun 3 gen 2022 alle ore 15:39

Hello everybody, first of all, happy new year! I developed a web dashboard for direwolf. It parses the log file and extracts some statistics. A realtime traffic monitor is also available. It's a beta

I am trying to get the Pat Winlink client to run under AX25. I have set up the axports file and the port binds wl2k (port name) to /tmp/kisstnc, but when I try to make a connection with Pat, I get