开云体育

Hello Charles, What is your goal here? Do you just want to replace the KPC3 with the TNC-Pi? That's possible but you won't use Direwolf here as Direwolf and the TNC-Pi do the same function. Pick

Direwolf is a software replacement for the traditional TNC.? Use one or the other but not both. Perhaps a PowerPoint presentation will make this clear. The difference between slides 12 and 13 in the

Any suggestions on using Direwolf with a RPi 3B and a TNC-Pi with a Kenwood TM-231/331 radio? Currently there is a KPC-3 and a desktop 386 PC which is failing. I am using JNOS, but am thinking about

Hei, I found this DW's transmit inhibit very useful. I'm running SvxLink and Direwolf in a RPi 3 which is connected to a Motorola GM340 transceiver with RIM-Maxtrac. Both FM and APRS are two-way

"Don Rolph" <don.rolph@...> writes: The gpsd project's stance is always that people should run the latest release... I would expect the shlib major changes, so you would then need to rebuild

I have been poking to try to understand some instabilities I have observed with Dire Wolf using gpsd under Raspbian BullsEye. I saw: - a flood of packets through the sound card when achieving gps

Hey Jeff, Oh.. your update partially changes my previous email which is great though: - The x86 binary is still the original old 32bit only i386 file - The ARM6 and ARM7 binaries are newer

Hello Jeff, I assume you're talking about the newest X-net binaries be it the v1.38 or newer v1.39 Beta at http://xnet.swiss-artg.ch/beta/index.htm ? I had tried those a LONG time ago but I always

I know you want to transmit, which is why I highlighted the transmit line from the user guide in bold. You use the same format. I just did a quick test. I created a 'kiss_packets' directory, and

Thanks again, Martin. Yes sir, I read that in the user guide, and can parse the result and decode *received* message packets just fine.? So now I want to *TRANSMIT* an ACK. What do I put in the

I'm curious if Xnet would work with the -p option in Direwolf. I had the linux version 1.39 running for several months (internet only) on a 2009 Asus netbook, then moved it to a 2012 RPi model B

Updating my last message... there's versions of X-Net for other platforms like DOS and even Atari.? Newer versions include ARM6 and ARM7 processors: https://www.n1uro.com/xnet/files/. ? I'm running

From the Direwolf User Guide: —— All received frames are displayed in the usual monitor format, preceded with the channel number inside of [ ]. [0]

Hi David, Thanks for the reply.? I'm running Linux Mint Xfce 64-bit version, Direwolf 1.6, and X-Net 1.38.? X-Net is a native Linux app for packet node-switching with several drivers available,

Hi Martin - thanks for your reply. That section tells you how to launch the program and various options. It says nothing about the format of the line of text you put in the file. Since Direwolf does

Section 14.6 of the Direwolf User Guide documents kissutil and the format it uses. The APRS content would be defined elsewhere, depending on exactly what kind of APRS data you're trying to

For more flexibility, the FX.25 transmit property can now be set individually by channel, rather than having a global setting for all channels. The -X on the command line now applies only to channel

Hello Douglas, A few things here when you start Direwolf: - Why are you using the fix parameter of "16" for CRC16 when enabling FX.25? Leaving it set to "-x 1" means automatic selection based on

Follow up. I setup a WIN machine with DW1.7A and an SDR to monitor what was going on. Here are my results: Note-: N1OBU-3 is Ch0 at 2k4 & N1OBU-4 is Ch1 at 9k6 on Station 1 N1OBU-5 is Ch0 at 2k4 &

Hello. I'm trying to use kissutil to send APRS message packets. I'm creating a file, and it gets consumed and deleted, but my message does not seem to go through. I'm sure my packet format is wrong,