开云体育

If I build a Stratum1 network Time Server, I'll get something that can do the job. For now, positioning is good. Fred N7FMH

Nothing missed, just additional commentary. J Fred N7FMH Sent: Wednesday, October 06, 2021 5:38 PM To: [email protected] Subject: Re: [direwolf] Repeating "GPSD: Location fix is now

GPS PPS signals are for ultra accurate time but not for position. There is arguably NOTHING in amateur radio that needs this level of precision other than maybe than bragging rights:

A lot of conversation about the PPS.I am pretty sure ths conversation was about getting position infomration through gpsd, not time (beyond the data stamp). I have no idea how a Garmin GLO2 could

Hi Fred, Both my Ublox devices - LEA4 (IIRC) and a considerably newer M8 - have 1PPS so yours likely does too. The Garmin I dabbled with was the 18-5Hz with sentences sent five times per second for

Hi Ray, Thanks for the link. I think my networked GPS (u-blox) has 1PPS. I haven't really checked it out. The Garmin GLO2 doesn’t have the capabilities. At least, that is what I gather from

Thanks David. Are you by chance on Discord? I'd love to chat about options. I'm not trying to get the KPC back into the stack. I just want the rPI to run direwolf and then find a good client that I

Hello Nick, You can definitely access Direwolf via port 8000 and 8001 for AX.25 services but a KPC3 cannot do this alone. There are ways to integrate a KPC3+ with Linux and add on AGW support with

Thanks all. I have a KPC3+ in the garage. But as you suspect ,I'm hoping to use Direworlf/Raspberry pi as a low level TNC, and then access it over the local area network via port 8000 or 8001. I've

Hello Max, KPC3+ TNCs are probably one of the best hardware TNCs out there but Direwolf has better packet decodes than it. They are pretty good for a "set it up and forget it deployment" but their

Hello Nick Direwolf is a TNC intended to provide lower level set of tools for APRS but it also offers extensive connectivity to OTHER TOOLS using KISS, TCP-KISS, AGW, etc. to support things like

I have used AGWTermTCP and connect to Dire Wolf through an AGW port for testing.It seems to have the features you are looking for. Also, having AGWMonitor running is helpful can be helpful when

BTW: How is the Kantronics KPC-3+? Been playing with Idea of getting one to have a hardware TNC to run a BBS. I have a MoblinkD TNC3, two SignaLink USB’s, and RPi’s, but still been eyeing

Hello, I use EasyTerm, but it’s Win and I run Win under VMWare on my MacBook Pro. http://uz7.ho.ua/packetradio.htm Sent from my iPhone 11 Max Pro

Hello. I've gotten Direwolf installed, and it's hearing packet traffic. Printing it out into the REPL or wahtever the terminal window is....but I can't seem to transmit. When I used to use a

Bump... Any more progress on this? I am not there yet, but this is on my list of winter projects.

Fred, I know you've done the hard yards and it's working for you but you may still find this page about gpsd interesting. https://gpsd.gitlab.io/gpsd/gpsd-time-service-howto.html FWIW I ran into the

Hi David, Thanks for the update and how strange if this was a gpsd thing. What version were you running before? Version 3.17 Gary’s comment: Wow, that is 4 years old. You need to update that.

An easy way to turn off the onboard audio is to comment out dtparm=audio=on in config.txt. # Enable audio (loads snd_bcm2835) #dtparam=audio=on I don't know if that affects hdmi audio because

Hello Fred, Thanks for the update and how strange if this was a gpsd thing. What version were you running before? Do you know what was the specific fix in the newer GPSD that resolved your