开云体育

Hello, is it possible to save in a csv file what decode direwolf? I try to create a file and then open it in a GIS software. Thank you in advance for your answers. 73 form Fred (France)

I have a use case where I want to run Direwolf on a Raspberry Pi 3 in my car and see the decoded packets on my cell phone. I could do this by running a hot spot on my phone, figuring out what IP

This same problem has been observed around here. After doing a little research, I came to the realization that both oddly behaving digipeaters have the APN382 system type. This translates to KPC-3 or

Kevin and I both wondered about that. I'd say it hears better than it transmits. Plus you get that feel that its transmissions are right on the edge working sometimes and other times not... too close

I'm surprised that the SignaLink USB would work at all with 9600 baud. According to the information here, http://www.frenning.dk/OZ1PIF_HOMEPAGE/SignaLinkUSB-mods.html

Roger that Kevin. I also need a good cheat sheet by my side when I see those useful mnemonics. John [direwolf_packet] <direwolf_packet@...> wrote:

John, I posted this because I really would like to know what that data is telling me. Right now all my levels are maxed out. Possibly over modulation and clipping? When the BBS gets moved what meaning

Kevin, According to the... https://github.com/wb2osz/direwolf/blob/master/doc/A-Better-APRS-Packet-Demodulator-Part-2-9600-baud.pdf ...document, the indicators are more about tuning accuracy at 9600

can someone help get dire wolf up and runnging on max osx 10.9.5 ? I have it installed and running on ubuntu 16.04 LTS, but can't get it to go on mac osx. thanks in advance! david

My students and I have been using Direwolf as a remote dashboard in our Super Mileage Vehicle race cars that the students have built. We seem to have identified an issue, possibly not with Direwolf

First I'd like to say I love this program and I hope the development continues! I am try debug an issue with Dire Wolf at 9600 baud in connected mode. My configuration: Windows 7 Ultimate Dire Wolf

David, After thoroughly reviewing the Bill of Materials, it did state the proper 555 timer (TLC555); a big oversight on my part. I'm assuming that the BOM has all of the correct components listed, I

Greg, The more 30m HF Rx Only Igates the better!! I have travelled the Simpson Desert (twice), NT, Cape York and Karumba and the 30m APRS coverage was fabulous. Most of the stations I "hit" were on

Far too many operators subscribe to the idea "don't fix it if it isn't broke", without understanding that every software is broken. Those authors that learn of problems that care are upgrading

Don't worry, receive only I-gates don't clog up anything. They're totally passive listening posts on the local RF network and their Internet traffic gets deduplicated vs anyone else who heard the same

The main reason for discouraging receive-only igates is that it breaks messaging, which would be nice to have in such a isolated location. Also Radios like the Kenwood D700/D710 and D7/D72/D74 will

Still have problems with the bleeding, no matter how I go about it, even as suggested. Works on some radios but not all. My Icom IC-T90A is horrific with the bleeding.

G’day, I’m new. Some blokes in Sydney suggested I set up a Receive only iGate in Alice Springs, Central Australia, which is about 1,500 kilometres [932 miles] from anywhere. When I go bush, I take

I suspect the digipeater he's talking about would be run by a guy that doesn't want to change, or it would have been done by now. Some APRS digi owners simply do not want to acknowledge changes that

I'm not so sure that I would just ignore it. If I knew the digipeater and could find the owner?I would be complaining. It's about time we started cleaning up the APRS infrastructure. Max KG4PID To: