开云体育

I've just done exactly the same thing today and am seeing the same thing - I'm receiving plenty of stations which are being decoded and shown in green or blue but only my own beacon shows magenta and

wrote: There is no way to be able to tell within 100ms if a packet has been digipeated or not. A typical packet is 500-1200ms long. Aprx has nothing to do with clear channel detection. Aprx processes

Hi Kenneth, Thanks fro the ideas with APRX. With the digipeaters in my area I don't ever see the packet fratricide that was described in the link. I'm my case I think it would be sufficient to delay

Greetings, I'm seeing evidence on other lists that Direwolf is incorrectly I-gating the payload of third-party packets with a network ID of "TCPIP" back to the APRS-IS (Namely the SMSGTE threads on

I have Direwolf set up on a Pi with a RTL SDR, I intended on putting an IGate up here, Everything appears to be working, I am receiving lots of APRS packets, I can send a beacon however it does not

direwolf_packet@...> wrote: And that implementation is the one I now maintain, Aprx: http://thelifeofkenneth.com/aprx/ Some of the old guard APRS developers don't like it, but the

Hello. I have tried to search this issue but didn't have any luck. I am running a Raspberry Pi2 with Direwolf v1.4 setup to run an APRS station and a mainly receive IGate. The RPi2 is running Jessie

What you are describing is known as "viscous" digipeating. The idea is that a digipeater would not retransmit frames immediately. Instead the frames are put into a holding area and transmitted after a

Hi I see that you can create a filter that doesn't digipeat packets that have already been digipeated is there a way to augment that filter is it also doesn't digipeat packets that have been

Hello Frank, What help do you need? If you have Direwolf working on Linux, you would again follow the Direwolf User Guide to compile the code for OSX and then configure it just like you did for Linux.

The purpose of direwolf is to provide a more flexible modem via a soundcard -- TNC Pi has a built-in modem. https://nw-digital-radio.groups.io/g/udrc/wiki/UDRC%E2%84%A2-and-Direwolf-Packet-Modem for

I've got a Pi with a TNCPi (from Coastal Systems), currently running APRX. Can Direwolf "talk" to the TNCPi, or do I really need to use the soundcard modem? Thanks! Clay N7QNM

I am new to this group. I sucessfully use Direwolf on one of my Ubuntu boxes. I would like to get it to run on my Macbook Pro (running OS 10.9.5 Mavericks). I would appreciate some help. Thanks in

I recently tried my Rigblaster plug n play on Windows 10, and using the UZ7HO soundmodem it will start transmitting with the PTT but it does release it, and I have to kill my UZ7 modem app to get it

I've got UISS running with Direwolf so I can use the IGate feature of Direwolf. It all seems to be working fine except no packets appear in the UISS monitor as when using AGWPE and I wanted to see if

$ Sudo adduser (your login name) dialout Perhaps ? Dave G0WBX

As an experiment I started direwolf with sudo, and mkiss connects ok, and I can use axcall to make a call to a nearby node successfully. Is there something I need to do to open permissions on

Thanks David, here's the output from strace: kev@kh-debian:~$ sudo mkiss /tmp/kisstnc /dev/pts/3 mkiss: open: Permission denied kev@kh-debian:~$ sudo strace mkiss /tmp/kisstnc /dev/pts/3

Strange. Try installing 'strace' and send us the trailing part from the output of: sudo strace mkiss /tmp/kisstnc /dev/pts/4 --David

I have direwolf and ax25 setup on a Raspberry Pi with Raspbian and it's all working good. I just tried to install and setup Debian Hamradio Pure Blend on a desktop that comes with ax25 and Direwolf