开云体育

Hello, My name is Frank. I wrote PinPoint. PinPoint is using UTF-16 (standard inside of .Net/Visual Studio) instead of UTF-8, which is the problem. I'll try to see if I can change that. Could you

Could you send a screen shot of how direwolf displays the packet and how PinPoint displays it? 73, John WB2OSZ

Thank you John WB2OSZ, Yes, port 8001 is specified. Pinpoint APRS has been able to receive the message. but received message is garbled and is not reflected on the map. 73

I just tried running PinPoint 2.1 and it looks fine to me. Is your TNC configuration using "network KISS mode" and TCP port 8001? 73, John WB2OSZ

Nice to meet you. I'm trying to connect Direwolf 1.6 running on a Raspberry Pi Zero 2 W to Pinpoint APRS 2.1 running on Windows 11 in network KISS mode, but it's not working. Messages from Direwolf

Hi Again, What I thought was an occurrence of this SDR issue was actually caused by old KPC3 devices. Anyway,? I was able to spot the actual SDR issue two times this week First occurrence: Frame

1) use VAC Mic and not line 2) use -ac 1 option in ffmpeg to set mono mode 3) there was also a mtu issue on virtual network that cut the traffic at 1420, so i set the nic of windows VM at 1400

Good to hear you're making progress. What was the fix here? Sending and receiving at a common rate of 44100? I also see a change on the Windows command line of using "-ac 1". If things are

OOOOOOK!!!!! After a lot of test (and failure) here a working conf: *WINDOWS HOST * ffmpeg version: *ffmpeg download ( https://www.gyan.dev/ffmpeg/builds/ffmpeg-release-essentials.zip ) * ffmpeg -f

direwolf.conf (/4 removed ): ``` ADEVICE0 udp:12000 null ARATE 44100 MYCALL TEST MODEM 300 1600:1800 7@30 ``` On windows host I tried 2 different build of ffmpeg and these commands to send audio

Hello Franco, Thank you for moving this topic over to the email list... This above command looks right though: - "-acodec" expects an input and output value. You say you used the test.wav

Good afternoon, I encountered an issue using UDP device on direwolf *** Scenario *** Audio sender: Windows 10 host with ffmpeg Receiver: Ubuntu Desktop 22.04 with direwolf last release

That is a very good point, complying with regulations. I forgot that some countries have much more stringent rules regarding automated control and repeater stations. But I'm glad to hear you were

One reason why I didn't enable digipeating is that the National Telecommunications Commission's rules say that only authorized clubs are allowed to install and operate repeaters, and I was concerned

Greetings. Good going on getting an APRS station set up. However, from your description of your environment and risks thereof, you may be going about this in the wrong direction. Bear in mind that

Hi Jay, You said " I didn't bother with enabling digipeat as there are no other digipeaters to send packets to or receive them from." Digipeaters are not only to talk to other digipeaters.

Good luck with your project.? I know there is WX information available through APRS-IS but not sure how well covered the Philippines are.? I am sure someone on here might be able to explain a method

I don't know whether it's common in groups.io to introduce yourself before posting for help, but it is in most online support forums so here goes: I'm Jay, DW7GDL, an ex-pat living in Cebu,

Thanks Geoffrey. Graeme VK2HFG

I wanted the aprsdroid station display to show nearby mobile and fixed APRS stations on both VHF and my licensed 40m HF frequency.? I also wanted to hear aprsdroid notifications of my digipeated pkts