开云体育

Thank you all.? I did get it to work with direwolf 1.7 and help from the code's author John. I commented out the AWGports because I am not using them. my conf file is: #HF ADEVICE? plughw:4,0

Was that just implemented for TCP KISS? Or did you just not post the AGW code? As stated in a previous post, I know the TCP KISS works, but as noted from the code, that is specific to receive. I am

In V1.7 of Direwolf, you can split the TCP/IP ports per ACHANNEL. Some applications (namely APRSIS32) will receive the multiple "streams", but only transmit on the first.?? (Lynn hasn't implemented

Hello Greg, When you say you only see your "channel 2 ports", what do you mean? Is it because you don't see the specific AGW and KISSTCP ports that correlate to your "channel 2" actually applied to

Thank you. I have tried various things.? It appears that it will only recognize the 2nd set of listed ports,? the first set gets ignored.? It doesn't matter what number they are assigned. My

The author should confirm, but I don't think Direwolf supports per-channel ports for the AGW and KISS protocol sockets. Both protocols support specifying which channel you want to use natively, so you

The question is what are you seeing your CHANNEL 2 port with? Since you have defined different KISS and AGW ports for each interface, you need to connect to both 8001 and 8003 (or 8100 and 8101) at

Hello I am new to this group.? I tried this in the beta release 1.7 and when I run Direolf I only see my channel 2 ports In short : ADEVICE? plughw:1,0 ACHANNELS 1 ADEVICE1? plughw:4,0 ACHANNELS 1

You might look at SV2AGW's agwterm: https://www.sv2agw.com/downloads/ -- 73, AB1PH Don Rolph

As I understand it, the goal is to use the connected mode packet radio protocol implemented in direwolf. KISS is not capable of accessing this layer so it is necessary to use the AGW protocol. I'm not

Doug, I've long started Direwolf from systemd and the significant difference I see between your Unit file and mine is I start "After=sound.target"? I used to start from screen as you do but for me,

You might find this helpful: weather_station.pdf?? in https://github.com/wb2osz/direwolf-doc. 73, John WB2OSZ

I have a weather station and I want to connected to the aprs service using my existing I get and DG Peter can anyone with me in the right direction please thank you

Bi-directional interaction. Yes, I would consider using the KISS interface to software modems. Of course, that would require the terminal to implement most of the AX.25 protocol.

Hello John, I'm aware of a few various packet programs for various OSes here: https://www.soundcardpacket.org/6compat.aspx#Terminal https://www.dxzone.com/catalog/Software/Packet/

Perhaps try using the sound target instead of network? After=sound.target You might benefit from understanding why it's exiting. I'm not sure if you'll see the logs in journalctl if you're running it

Are you looking for bi-direction information, or just monitoring the (received data from the remote station)? Also, are you stuck on AGW or are you willing to entertain KISS over TCP/IP? KISS over

I'm trying to run DW from a service on boot.? It starts and then stops.? I suspect it's stopping because the USB soundcard isn't initialized yet.? Wondering how to start the service after the USB

Can you recommend software to interact with a remote station from a command line, using the AGW interface to Direwolf? I'm aware of QtTermTCP and EasyTerm, but those are GUIs. I'm looking for

Hi All, Its a custom modified cm108 originally built for AllStar Thanks Matthew